Powering Off And Powering On The Server; Server Power Button; Power States - HP Integrity rx6600 Installation Manual

Hide thumbs Also See for Integrity rx6600:

Table of Contents

Powering Off and Powering On the Server

This section provides information and procedures for powering off and powering on the server.

For more information, see the operating system documentation.

Figure 24

shows the server Power button.

Figure 24 Server Power Button

The server has three power states:

Standby power

Full power

Off

Table 14

lists the server power states.

Installing the System

Plug the power cord into the appropriate receptacle on the rear of the chassis;

the front panel Power button is not turned on.

Full power occurs when you plug the power cord into the appropriate

receptacle, and either activate the power using the iLO 2 MP PC command,

or press the Power button.

Unplug the power cords.

Table of Contents