GRAUPNER 65 User Manual page 31

For easy installation of jib and mainsheet small vortices are noded at the sheets end to prevent twisting of
the cord and can be hooked into the carabiner easier
First please measure the distance between the tense and focused on middle traveller eyelet from the pivot
point of the boom.
This distance minus 4-5 mm they represent between 41 and 43 a to part 43. cord by the (43) should now run
through the eyelet (19) are threaded to cover the vertical is less than (43). From there it passes through the
metal ring at the end of the foredeck and further back to the carbine.
innovation & technologie
When the mainsail cord passes through the clam-
ping brackets on the main boom through the eye of
traveller and thence also to the carbine at the rear.
31