Install The Dock Through Usb-C (Wired); Connect The Dock; Install The Drivers; Charge A Device - StarTech.com DKWG30DPHPD User Manual

Install the dock through USB-C (wired)

If you have a USB-C equipped host laptop that supports USB Power Delivery 2.0 and
DP alt mode, you can connect the dock to your laptop using the provided USB-C cable.
Note: The dock can connect to a host laptop's USB-C port even if it doesn't support
USB Power Delivery 2.0 and DP alt mode. However, without support for these two
protocols, the dock will not pass power through to your host laptop or support video
output.
Power the dock
1. Connect the appropriate power cord for your region to the power adapter.
2. Connect the power adapter to an AC electrical outlet and to the dock's DC power
input port, then press the dock's Power button.

Connect the dock

1. Connect your external display(s) to the dock's video port(s) (for example, one
DisplayPort display and one HDMI display).
2. Connect your peripherals to the dock (for example, USB devices, RJ 45 network).
3. Connect the provided USB-C cable to a USB-C port on your host laptop and to the
dock's USB-C port.
Notes:
• For dual-display requirements, see the "Configure a display device" section.
• Do not connect anything to the USB-C port while in WiGig mode.

Install the drivers

The required drivers will install automatically when the dock is powered and
connected to your host laptop.

Charge a device

You can use the dock's front and rear USB 3.0 ports to charge a mobile device, even
when the dock isn't connected to your host laptop. The dock's USB 2.0 ports will not
charge mobile devices without a connection to a host laptop.
The dock's front USB 3.0 port is a fast-charge and sync port that is compliant with USB
Battery Charging Specificiation Revision 1.2.
• To fast-charge a device, connect it to the front USB 3.0 port.
Instruction manual
7