HP 33120A User Manual page 99

Chapter 3 Features and Functions
Arbitrary Waveforms
Additional Information on Arbitrary Waveforms
• Press the
key to output the arbitrary waveform currently
Arb
selected (to scroll through the waveform choices and make a
selection, press
Arb List
• In addition to creating a new arbitrary waveform from the front
panel, you can also edit any existing user-defined waveforms. You can
edit waveforms created either from the front panel or from the
remote interface. However, you cannot edit any of the five built-in
arbitrary waveforms.
Use the " " option under the
GET
to load an existing user-defined waveform. Then, use the
, and
POINT EDIT INVERT
• The
command in the
INVERT
point in the specified waveform by changing the sign.
• You can use the
DELETE
user-defined waveforms in volatile memory. A list of all user-defined
waveforms appears when you move to the
108
).
command in the
NEW ARB
commands to edit the waveform.
takes the inverse of each
EDIT MENU
command in the
EDIT MENU
DELETE
EDIT MENU
,
LINE EDIT
to delete any
command.