Baud Rate Selection; Parity Selection - HP 33120A User Manual

Chapter 3 Features and Functions
Remote Interface Configuration

Baud Rate Selection (

You can select one of six baud rates for
to 9600 baud when the function generator is shipped from the factory.
The baud rate can be set from the front-panel only.
• Select one of the following: 300, 600, 1200, 2400, 4800, or 9600 baud.
The factory setting is 9600 baud.
• The baud rate selection is stored in non-volatile memory, and does not
change when power has been off or after a remote interface reset.
• Front-Panel Operation:
3: BAUD RATE (I/O MENU)
See also "To set the baud rate," on page 219.

Parity Selection (

RS
You can select the parity for
is configured for no parity and 8 data bits when shipped from the factory.
The parity can be set from the front-panel only.
• Select one of the following: None (8 data bits), Even (7 data bits),
or Odd (7 data bits). When you set the parity, you are indirectly
setting the number of data bits.
• The parity selection is stored in non-volatile memory, and does not
change when power has been off or after a remote interface reset.
• To download binary data for arbitrary waveforms over the
interface, you must select 8 data bits with no parity.
• Front-Panel Operation:
4: PARITY (I/O MENU)
See also "To set the parity," on page 220.
116
-232)
RS
-232 operation. The rate is set
RS
-232)
-232 operation. The function generator
RS
-232
RS