Table of Contents
Advertisement
Chapter 2 Front-Panel Menu Operation
A front-panel menu tutorial
Messages Displayed During Menu Use
You pressed
TOP OF MENU
menu and you cannot go any higher.
To turn off the menu, press
on a level, press
or
<
>
You are on the "
MENUS
MENUS
You are on the "
COMMANDS
choices within the selected menu group.
You are on the "
PARAMETER
parameter for the selected command.
You pressed
MENU BOTTOM
level of the menu and you cannot go any lower.
To turn off the menu, press
The change made on the "
ENTERED
you press
(Menu Enter) to execute the command.
Enter
The value you specified on the "
MIN VALUE
selected command. The minimum value allowed is displayed for you to edit.
The value you specified on the "
MAX VALUE
selected command. The maximum value allowed is displayed for you to edit.
You will see this message if you turn off the menu by pressing
EXITING
Menu On/Off
or
Shift
Shift
"
" level and changes were
PARAMETER
You will see this message if you turn off the menu by pressing
NOT ENTERED
or
Shift
Menu On/Off
Shift
changes were
saved. Press the
NOT
made on the "
" level.
PARAMETER
34
∧
while on the "
" level; this is the top level of the
MENUS
Shift
Menu On/Off
. To move across the choices
. To move down a level, press
" level. Press
<
or
>
" level. Press
COMMANDS
" level. Press
PARAMETER
∨
while on the "
PARAMETER
. To move up a level, press
Shift
Menu On/Off
" level is saved. This is displayed after
PARAMETER
PARAMETER
PARAMETER
Cancel
. You did not edit any values on the
saved.
NOT
. You did some editing of parameters but the
Cancel
key (Menu Enter) to save changes
Enter
∨
.
to view the choices.
or
to view the command
<
>
<
>
or
to view and edit the
" level; this is the bottom
∧
.
" level is too small for the
" level is too large for the
Advertisement
Table of Contents
