Brother MFC7050C Service Manual page 47

(6) Remove the two screws from the panel rear cover.
(7) Unhook the panel rear cover from eight "X" latches provided on the control panel and lift up
the panel rear cover.
(8) Fully turn the document front sensor actuator to the rear and lift it up.
(9) Unhook the document sensor PCB from two "Y" latches.
(10) Unhook the control panel PCB from four "Z" latches.
(11) Slightly lift up the control panel PCB, then unlock the LCD cable connector and disconnect the
LCD flat cable. Next, unlock the FPC key connector and disconnect the FPC key.
IV - 10