Auto Sheet Feeder (Asf - Brother MFC7050C Service Manual

1.8

Auto Sheet Feeder (ASF)

(1) Remove two screws "a" that secure the ASF to the frame chassis.
(2) Remove screw "b" that secures the ASF to the paper feed motor bracket.
(3) At the left end of the ASF (when viewed from the rear), press the latch inwards to unhook it
from the square hole provided in the frame chassis, then lift up the ASF.
n n
Reassembling Notes
• When reinstalling the ASF, fit the boss provided on the right end into the cutout of the paper
feed motor bracket.
• If you replace the ASF with a new one, attach a new harness protection film to the new ASF as
illustrated below. Route the paper feed motor harness on the harness protection film.
IV - 21