Brother MFC7050C Service Manual page 137

EEPROM Customizing Codes
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
n Operating Procedure
(1) To make the equipment enter the maintenance mode, press the Function, *, 2, 8, 6, and 4
keys in this order.
The equipment beeps for approx. one second and displays "
the LCD.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 1001 in the case of U.S.A. versions) appears.
(3) Enter the desired customizing code (e.g., 0002 in the case of Canadian versions).
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the equipment will malfunction.
(4) Press the Start key.
The equipment saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop key or no keys are pressed for one minute in the above procedure, the
equipment stops the procedure and returns to the initial stage of the maintenance mode.
n EEPROM Customizing Codes List
Versions
U.S.A.
CANADA
Model
MFC7050C
1001
0002
Within 2 seconds
" on