Sensor Lever (Registration Sensor Actuator - Brother MFC7050C Service Manual

1.28 Sensor Lever (Registration sensor actuator)

(1) Unhook the sensor lever (registration sensor actuator) in the direction of arrow • and remove
it in the direction of arrows ‚ and ƒ.
(2) Remove the sensor lever spring.
n n
Reassembling Notes
• After setting the four pinch roller ASSYs but before hooking the two feed springs on the two
center pinch roller ASSYs, attach the sensor lever to the frame chassis. Hook the bent end and
straight end of the sensor lever spring to section "x" of the sensor lever and section "y" between
the ribs on the pinch roller ASSY, respectively, as shown above.
IV - 50