Brother MFC7050C Service Manual page 119

Selector
No.
1 Detection time length of the
| disconnection tone in ICM recording
4
5
| Not used.
8
NOTE: Selectors 1 through 4 are applicable to those models equipped with a built-in TAD.
l Selectors 1 through 4:
If the equipment detects disconnection tone for the time length set by these selectors, it will
disconnect the line.
Selector
No.
1 ECP mode*
2
| Not used.
8
l Selector 1: ECP mode
The ECP mode enhances the normal bidirectional communications between the facsimile equipment
and the connected PC for higher transmission speed.
WSW35
(Function setting 3)
Function
Detection time length of the disconnection tone in ICM recording
WSW36
(Function setting 4)
Function
V - 17
Setting and Specifications
No. 1 2 3 4
0 0 0 0 :
0 0 0 1 :
0 0 1 0 :
0 1 0 0 :
|
1 1 1 1 :
Setting and Specifications
0: ON 1:
*ECP (Enhanced Capabilities Port)
No detection
1 sec.
2 sec.
4 sec.
|
15 sec.
OFF