Control Panel And Digital Display - Panasonic hl-g1 User Manual

HL-G1 User's Manual

4.3 Control Panel and Digital Display

The measurement functions of the sensor are controlled via the control panel. The currently
selected function or setting is shown in the digital display.
NOTE
In order to ensure the performance of the system, allow a warm-up time of at
least 30 minutes after the system is turned ON.
The control panel of the sensor head looks as shown below.
1 2
OUT 1
LASER ALARM
ENTER
7 6
Laser indicator (LASER)
1
Lights up in green during laser emission.
Alarm indicator (ALARM)
2
Lights up in orange if an alarm occurs during measurement.
OUT1/OUT2/OUT3 indicator
3
Lights up in yellow during output
[UP] key
4
Used to select items or change numerical values.
[DOWN] key
5
Used to select items or change numerical values.
Digital display
6
Displays measurement values and system errors.
[ENTER] key
7
Used to access the functions and to confirm input.
The digital display has the following properties and functions:
Item
Decimal point
Undefined status of
output data
SEN TRONIC
AG
Produkte, Support und Service
3 4
2 3
SELECT
5
Description
The position of the decimal point varies
with each model.
The status of the output data may be-
come undefined under certain conditions
(see page 31).
Rugghölzli 2
CH - 5453 Busslingen
4.3 Control Panel and Digital Display
Sensor type Digital display
 30mm type
 50/80/120mm type
All types
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
43
mailbox@sentronic.com
www.sentronic.com