About The Power Supply Cable - Panasonic AG-BS300P Operating Instructions Manual

About the Power Supply Cable

Use the power supply cable with the following specifications with this unit.
The extension length of 100 m cannot be maintained between the base station (AG-BS300) and the camera adapter (AG-CA300) especially
if the resistance value is larger than the following specifications.
(NAC3FCA)
1) Real cross-section area of the conductor
3.5 mm 2
2) Structure
Number of wires: 4
Cross-section area of each wire: 1.75 mm
3) Withstanding voltage
AC 60 V or higher
Real applied voltage: DC 24 V
4) Stranding pitch
Stranding pitch for 4 wires: 110 mm
NAC3FCA
N
L
OPEN
5) Finished external dimensions
10 mm or less
6) End connector part numbers
AG-CA300 side: NAC3FCA
(Manufacturer: Neutrik)
AG-BS300 side: NAC3FCB
(Manufacturer: Neutrik)
7) Recommended cables
DC50V10-NACAB-SC (50 m)
DC100V10-NACAB-SC (100 m)
(UL48897, AWM2517, 300 V, 105 °C, VW-1, Manufacturer: Canare Electric)
13
(UL48897, AWM2517, 300 V, 105 °C, VW-1)
(NAC3FCB)
110 mm NAC3FCB
N
L
OPEN