Salus ST325TX Instruction Manual page 5

PAIRING THE THERMOSTAT AND THE RECEIVER
It is important to correctly pair both the receiver and thermostat to ensure that the RF
address codes are matched and that reliable communication is established between the
units. Please follow the instructions below to ensure that the units are configured correctly.
On the receiver:
Press and hold the sync button on the receiver to put the receiver into pairing mode*.
LOCATION OF SYNC BUTTONS ON THE RECEIVERS
RXRT505 RXBC605
*Please note this receiver
does not have a sync
button. Switching it on
automatically puts it into
pairing mode.
For full instructions on
For full instructions on
the receiver pairing
the receiver pairing refer
refer to the RXRT505
to the RXBC605 manual.
manual. See page 7.
ST325TX INSTRUCTION MANUAL
RXVBC605
Sync
Button
For full instructions on the
receiver pairing refer to the
RXBC605 manual. See page 16.
RXST625
Press reset
button first
Sync
Button
Sync Button
For full instructions on the
receiver pairing refer to the
RXST625 manual. See page 9.
RXWBC605
Sync Button
For full instructions on the
receiver pairing refer to
the RXWBC605 manual.
See page 23.
5