Table of Contents
Advertisement
5-2 Using the Engraving Cutter
74
Chapter 5 Appendix
Chapter 5 Appendix
Spanner
(small)
Spanner
(large)
Cutter
Tool retaining screw
Hexagonal screw
driver (small)
Using two Spanners, tighten the
collet fully.
Lower the spindle and bring the
tip of the collet close to the sur-
face of the workpiece.
Insert the cutter.
Making the tip of the cutter touch
the surface of the workpiece, and
tighten the tool retaining screw.
Advertisement
Table of Contents
