Selecting The Command Set; What Is Command Set; Selecting Command Set - Roland MDX-40A User Manual

Benchtop milling machine

Hide thumbs Also See for MDX-40A:

Table of Contents

3-3 Selecting the Command Set

In this machine, the following command sets are available for selection.

 RML-1

Select when you want to use the software that is included with the machine.

 NC code

Select when you want to use the NC code. For the details of NC code, refer to "NC Code Specifica-

tion" on page 87 and "NC Code Reference Guide" that is included with the machine.

 Selected automatically (RML-1/NC Code)

The machine becomes ready to accept the cutting programs of RML-1 and NC code command

sets.

Select the appropriate command mode to match the application software to be used. If a command

that is sent to the machine is different from the command set selected on the VPanel, an error occurs

and cutting becomes impossible.

Command set is displayed on the title bar of the VPanel. The setting at shipping from the factory is

"RML-1. "

Procedure



Start the machine.



P. 43, "How to Start the Machine"



Chapter 3 Basic Operation

Command set that is currently selected

Click the [Setup] button on the

VPanel.

The "Setup" screen appears.

Table of Contents