Table of Contents
Advertisement
4-2 Installing a Tool
Spanner (Large)
60
Chapter 4 Getting Ready for and Performing Cutting
Spanner (Small)
Loosely tighten the collet with
tool.
While supporting the tool to keep it
from falling, twist and lightly secure
the collet.
Fully tighten the collet.
While holding the tool with the fingers
to keep it from falling, tightly secure the
collet by using two spanners.
After installing the tool, set the reference
position (Z and XY origin).
P. 61, "Setting Origin Point"
Advertisement
Table of Contents
