Roland MDX-40A User Manual page 10

Benchtop milling machine
Hide thumbs Also See for MDX-40A:
Table of Contents

Advertisement

To Ensure Safe Use
CAUTION
Unloading and emplacement are op-
erations that must be performed by 4
persons or more.
Tasks that require undue effort when
performed by a small number of persons
may result in physical injury. Also, if
dropped, such items may cause injury.
Install in a location that is level and
stable.
Installation in an unsuitable location
may cause an accident, including a fall
or tipover.
The cutting waste or workpiece may catch fire or pose a health hazard.
WARNING
Never attempt to cut magnesium or
any other such flammable material.
Fire may occur during cutting.
Keep open flame away from the work
area.
Cutting waste may ignite. Powdered ma-
terial is extremely flammable, and even
metal material may catch fire.
When using a vacuum cleaner to take
up cutting waste, exercise caution to
prevent fire or dust explosion.
Taking up fine cuttings using an ordinary
vacuum cleaner may cause danger of
fire or explosion. Check with the manu-
facturer of the vacuum cleaner. When
the safety of use cannot be determined,
clean using a brush or the like, without
using the vacuum cleaner.
8
This machine weighs 65 kg (144 lb.)
CAUTION
Wear dust goggles and a mask. Wash
away any cutting waste remaining on
the hands.
Accidentally swallowing or inhaling
cutting waste may be hazardous to the
health.

Advertisement

Table of Contents
loading

Table of Contents