Quitting Cutting By Operating From The Vpanel - Roland MDX-40A User Manual

Quitting Cutting by Operating from the VPanel

This stops cutting through operation using VPanel.
Procedure

Lighted

Dark
3-6 Pausing/Resuming/Quitting of Cutting
Click [Quit Cutting] during cut-
ting.
The tool movement is stopped on the
spot, and the VIEW lamp comes on.
Rotation of the spindle does not stop
at this time.
Confirm the message and click
[Quit Cutting].
The spindle rotation stops, and the VIEW
lamp goes dark. This completes the quit-
ting of cutting operation.
Chapter 3 Basic Operation
55