Linksys LAPAC1750PRO User Manual page 94

LAPAC1750PRO Access Point Software User Manual
Global RADIUS If the Verification Mode is RADIUS, select to specify
that the default Global RADIUS server list is used to
authenticating clients If you want the CP feature to use
a different set of RADIUS servers, clear this setting and
configure the servers in the fields on this page
RADIUS Enables tracking and measuring the resources a
Accounting particular user has consumed, such as system time and
amount of data transmitted and received
RADIUS IP Specify whether the RADIUS IP addresses are IPv4 or IPv6
Network RADIUS server addresses
RADIUS IP The IPv4 or IPv6 address for the primary RADIUS server
for this VAP The IPv4 address should be in a form similar
to xxx xxx xxx xxx (192 0 2 10) The IPv6 address should
be in a form similar to xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:
xxxx (2001:DB8::CAD5:7D91)
When the first wireless client tries to authenticate with
a VAP, the access point sends an authentication request
to the primary server If the primary server responds to
the authentication request, the access point continues
to use this RADIUS server as the primary server, and
authentication requests are sent to the address you
specify
RADIUS Backup Up to three IPv4 or IPv6 backup RADIUS server
IP 1–3 addresses
If authentication fails with the primary server, each
configured backup server is tried in sequence
RADIUS Current Specify which RADIUS server to use to authenticate
clients:
primary — Use the RADIUS server with the IP address
•
configured in the RADIUS IP field
• backupone — Use the RADIUS server with the IP
address configured in the RADIUS Backup IP 1 field
backuptwo — Use the RADIUS server with the IP
•
address configured in the RADIUS Backup IP 2 field
• backupthree — Use the RADIUS server with the IP
address configured in the RADIUS Backup IP 3 field
Section 3: Configuring the Access Point
RADIUS Key The shared secret key that the access point uses to
authenticate to the primary RADIUS server
You can use up to 63 standard alphanumeric and special
characters The key is case sensitive and must match the
key configured on the RADIUS server The text you enter
will be displayed as "*" characters
RADIUS Backup The RADIUS key associated with the configured backup
Key 1–3 RADIUS servers The server at RADIUS IP Address-1 uses
RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2,
and so on
Locale Count The number of locales associated with the instance You
can create and assign up to three different locales to
each CP instance from the Web Customization page
Delete Instance To delete the current instance, select this option and
click Save .
92