Linksys LAPAC1750PRO User Manual page 26

LAPAC1750PRO Access Point Software User Manual
From Email Address Specify the email address that appears in the From
field of alert messages sent from the AP, for example
AP23@foo com The address can be a maximum
of 255 characters and can contain only printable
characters By default, no address is configured
Log Duration This duration, in minutes, determines how frequently
the non critical messages are sent to the SMTP
Server The range is 30-1440 minutes The default is
30 minutes
Urgent Message
Configures the severity level for log messages
that are considered to be urgent Messages in this
Severity
category are sent immediately The security level you
select and all higher levels are urgent:
• Emergency indicates system is unusable It is the
highest level of severity
• Alert
immediately
• Critical indicates critical conditions
• Error indicates error conditions
• Warning indicates warning conditions
• Notice
conditions
• Informational indicates informational messages
•
Debug indicates debug-level messages
Non Urgent Severity Configures the severity level for log messages that
are considered to be non urgent Messages in this
category are collected and sent in a digest form at
the time interval specified by the Log Duration field
The security level you select, and all levels up to but
not including the lowest urgent level, are considered
non-urgent Messages below the security level you
specify are not sent via email
See the Urgent Message field description for
information about the security levels
indicates action must be taken
indicates normal but significant
Section 3: Configuring the Access Point
Mail Server Configuration
Mail Server Address Specify the IP address or hostname of the SMTP
server on the network
Mail Server Security Specify whether to use SMTP over SSL (TLSv1) or
no security (Open) for authentication with the mail
server The default is TLSv1
Mail Server Port Configures the TCP port number for SMTP The range
is a valid port number from 0 to 65535 The default is
"465", which is the standard port for SMTP
Username Specify the username to use when authentication
with the mail server is required The username is a
64-byte character string with all printable characters
The default is "admin"
Password Specify the password associated with the username
configured in the previous field
Message Configuration
To Address 1 Configure the first email address to which alert
messages are sent The address must be a valid email
address By default, no address is configured
To Address 2
Optionally, configure the second email address to
which alert messages are sent The address must
be a valid email address By default, no address is
configured
To Address 3 Optionally, configure the third email address to
which alert messages are sent The address must
be a valid email address By default, no address is
configured
Email Subject Specify the text to be displayed in the subject of the
email alert message The subject can contain up to
255 alphanumeric characters The default is "Log
message from AP"
24