Linksys LAPAC1750PRO User Manual page 28

LAPAC1750PRO Access Point Software User Manual
HTTP/HTTPS Service
The AP can be managed through HTTP or secure HTTP (HTTPS) sessions By
default both HTTP and HTTPS access are enabled Either access type can be
disabled separately
To configure Web server settings, click the Services > Web Server tab
Figure 19: HTTP/HTTPS Service
Section 3: Configuring the Access Point
Table 21: HTTP/HTTPS Service
Field Description
HTTP Server Enable or disable access through HTTP This setting is
independent of the HTTPS server status setting
Status
HTTP Port Specify the port number for HTTP traffic (default is "80")
HTTP Redirect Redirecting all traffic from HTTP to HTTPS and make
sure users always access the site securely This field is
to HTTPS
available only when HTTP access disabled
HTTPS Server
Enable or disable access through a Secure HTTP Server
(HTTPS)
Status
HTTPS Port Specify the port number for HTTPS traffic (default is
"443")
Maximum When a user logs in to the AP web interface, a session is
created This session is maintained until the user logs off
Sessions
or the session inactivity timer expires
Enter the number web sessions, including both HTTP
and HTTPS, that can exist at the same time The range is
1–10 sessions The default is "5 " If the maximum number
of sessions is reached, the next user who attempts to log
on to the AP web interface receives an error message
about the session limit
Session Enter the maximum amount of time in minutes an
inactive user remains logged on to the AP web interface
Timeout
When the configured timeout is reached, the user is
automatically logged off the AP The range is 1–1440
minutes (1440 minutes = 1 day) The default is "60"
(minutes)
26