Linksys LAPAC1750PRO User Manual page 51

LAPAC1750PRO Access Point Software User Manual
Enable RADIUS Select this option to track and measure the resources
a particular user has consumed such as system time,
Accounting
amount of data transmitted and received, and so on
If you enable RADIUS accounting, it is enabled for the
primary RADIUS server and all backup servers
Active Server The RADIUS IP address and key for up to four RADIUS
servers can be configured on the AP Select which of
the four RADIUS servers the VAP should contact to
authenticate wireless clients
Broadcast Key
Enter a value to set the interval at which the AP will
refresh session (unicast) keys for each client associated
Refresh Rate
to the VAP
The valid range is 0–86400 seconds A value of 0
indicates that the broadcast key is not refreshed
Session Key Enter a value to set the interval at which the AP will
refresh session (unicast) keys for each client associated
Refresh Rate
to the VAP
Section 3: Configuring the Access Point
Scheduler
The Radio and VAP Scheduler is a standalone LAPAC1750PRO Access Point
feature To configure the Radio and VAP scheduler, select the Scheduler tab in
the Manage section The Radio and VAP Scheduler allows you to configure a
rule with a specific time interval for VAPs or radios to be operational, thereby
automating the enabling or disabling of the VAPs and radios
One of the ways you can use this feature is to schedule radios to operate
only during the office working hours in order to achieve security and reduce
power consumption You can also use the scheduler to allow access to VAPs for
wireless clients only during specific times of day
Each rule specifies the start time, end time and day (or days) of the week
the radio or VAP can be operational The rules are periodic in nature and are
repeated every week
A valid rule must contain all of the following parameters:
• Days of the Week
•
Start Time (hour and minutes)
• End Time (hour and minutes)
Only valid rules are added to the profile Up to 16 rules are grouped together
to form a scheduling profile Any two entries belonging to the same profile
must not overlap The time granularity for the schedules is one minute The
LAPAC1750PRO Access Point supports up to 16 profiles
49