Radio Statistics - Linksys LAPAC1750PRO User Manual

LAPAC1750PRO Access Point Software User Manual
Mode The Physical Layer (PHY) standard the radio uses:
•
IEEE 802 11b/g — 802 11b and 802 11g clients can
connect to the AP
•
IEEE 802 11b/g/n — 802 11b, 802 11g, and 802 11n
clients operating in the 2 4-GHz frequency can
connect to the AP
• IEEE 802 11n — Only 802 11n clients operating in the
2 4-GHz frequency can connect to the AP
•
IEEE 802 11a — Only 802 11a clients can connect to
the AP This mode is available only on Radio 2
• IEEE 802 11a/n/ac — 802 11a, 802 11n, and 802 11ac
clients operating in the 5-GHz frequency can
connect to the AP This mode is available only on
Radio 2
• IEEE 802 11n/ac — 802 11n clients and 802 11ac clients
operating in the 5-GHz frequency can connect to
the AP This mode is available only on Radio 2
Channel The current operating channel The channel defines
the portion of the radio spectrum the radio uses for
transmitting and receiving Each mode offers a number
of channels, depending on how the spectrum is licensed
by national and transnational authorities such as the
Federal Communications Commission (FCC) or the
International Telecommunication Union (ITU-R)
Operational The size of the bandwidth, in MHz, the current channel
Bandwidth is using
To change the radio mode or channel settings, click the Edit link After you click
Edit, you are redirected to the Radio page
For information about configuring these settings, see "Radio" on page 34
Section 2: Viewing Access Point System Status

Radio Statistics

The Radio Statistics page provides detailed information about the packets and
bytes transmitted and received on the radio (wireless) interface of this access
point
To view Radio Statistics, click the System Status > Radio Statistics tab
Figure 4: Radio Statistics
The following table describes details about the Radio Statistics information
Table 6: Radio Statistics Information
Field Description
Radio Choose either radio 1 or radio 2
WLAN Packets Total packets received by the AP on this radio interface
Received
WLAN Bytes Total bytes received by the AP on this radio interface
Received
WLAN Packets Total packets transmitted by the AP on this radio interface
Transmitted
10