Linksys LAPAC1750PRO User Manual page 81

LAPAC1750PRO Access Point Software User Manual
Figure 40: QoS DiffServ Policy Map
Section 3: Configuring the Access Point
Table 48: DiffServ Policy Map
Field
Policy Map Name
Policy Map Name
(Policy Class Definition)
Class Map Name
Police Simple
Send
Drop
Description
Enter then name of the policy map to
add The name can contain up to 31
alphanumeric characters
Select the policy to associate with a
member class
Select the member class to associate
with this policy name
Select this option to establish the
traffic policing style for the class
The simple form of the policing style
uses a single data rate and burst size,
resulting in two outcomes: conform
and nonconform
Committed Rate
Enter the committed rate, in Kbps, to
which traffic must conform
Committed Burst
Enter the committed burst size, in
bytes, to which traffic must conform
Ideally, burst size should be 1 5 times
the committed rate (in bytes) for
Rate Limiting to work properly For
example, if the committed rate is 1
Gbps, then the committed burst size
should be 187500000 bytes
Select Send to specify that all packets
for the associated traffic stream are
to be forwarded if the class map
criterion is met
Select Drop to specify that all packets
for the associated traffic stream are to
be dropped if the class map criterion
is met
79