Compact full-hd 1080p dash camera with 3.2" ips screen & gps logger (40 pages)
Summary of Contents for Kapture KPT-850
Page 1
KPT - DISCREET DASH CAM 1 0 8 0 P G P S , W I F I & S U P E R C A P A C I T O R W I T H 152° USER MANUAL Y O U R E Y E W I T N E S S O N T H E R O A D ™...
2.4 INSTALLING YOUR KPT-850 WINDSHIELD BRACKET ..............7 2.5 INSTALLING YOUR GPS RECEIVER ....................7 2.6 CONNECTING POWER TO YOUR KPT-850 ..................7 2.7 REMOVING THE KPT-850 FROM THE MOUNT ................7 2.8 POWERING UP THE KPT-850 ......................7-8 2.8.1 MANUALLY POWERING OFF THE KPT-850 ............... 8 2.9 SMARTPHONE CONNECTION ......................
• Only use the included cable to power the KPT-850. • When running the power KPT-850’s power cable be sure to run it to the right of your windscreen ensuring that the cable does not impede the drivers view.
NOTE: Your KPT-850 is configured by using the app (Refer page 8). There are no buttons or menus on the actual device. 1.1 FEATURES • Recording Full HD 1080P footage at 30 frames per second •...
__________________________________________________________________________________________________________________ NOTE: • Do not insert or remove a Micro SD card while your KPT-850 is powered up or recording. This may damage your Micro SD card. • Please use Class 10 or higher rated Micro SD cards up to 64GB •...
__________________________________________________________________________________________________________________ NOTE: • It is recommended that the KPT-850 is mounted behind your rear view mirror so that it is not obstructing the drivers view. • Once installed it is not recommended that the Windshield Bracket is removed as it is not possible to re-install once it has been removed.
To connect to your KPT-850, power up the device with it plugged into your vehicles power and your vehicles accessory power on. 2. Wait for approx. 30 seconds for the KPT-850 to start up and go into your smartphones WiFi setting.
USING THE KPT-850 APP Once you open the KPT-850 App (ensuring your phone is connected to the camera via WiFi) the front page will give you access to options available such as live view, GPS data, Album, and app details.
(to download mapping). FIG 3.7 To playback your videos please follow the instructions below. 1. In the KPT-850 App press the Open KPT-850 on the main app screen. (Refer to page 9 - FIG 3) 2. Press the folder icon in the bottom left of the screen.
• Android users, please make sure the Smart Network Switch or WiFi Scanning setting on your phone is turned off. • For mapping to appear while connected to the KPT-850’s WiFi connection, the WiFi assist function must be activated on your smartphone.
5.2 WIFI WiFi is used to connect your KPT-850 to your smart device. By using the KPT-850 App, you can edit setting on the camera, playback videos and GPS recording, and transfer video.
ABOUT THIS GUIDE The content in this document is for information purpose and is subject to change without prior notice. We made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred.
Page 16
Y O U R E Y E W I T N E S S O N T H E R O A D ™ www.kapturecam.com.au www.directed.com.au www.kapturecam.co.nz www.directed.co.nz...