Samsung ML32E User Manual page 78

Chapter 5. Menu
System ▼
2nd 3rd
Time
Clock Set
DST
Sleep Timer
Power On Delay
Auto Source Switching
Auto Source Switching
Primary Source Recovery
Primary Source
Description
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a
specified time using the Timer function.
• Press the button if you want to view the current time.
INFO
Select Clock Set. Select Date or Time, and then press
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press
• You can set the Date and Time directly by pressing the number buttons on the remote control.
Switches the DST (Daylight Saving Time) function on or off.
Automatically shuts off the product after a preset period of time.
• Use the up and down arrows to select a period of time, and then press
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
Turning on the display with Auto Source Switching
display will automatically search the different video input sources for active video.
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the first video source in the sequence if no video is found.
Select whether to restore the selected primary input source when a primary input source is connected.
• The Primary Source Recovery function is disabled if
Specify Primary Source for the automatic input source.
.
when done.
. To cancel Sleep
On, and the previous video source selection is not active, the
Primary Source is set to All.
78
Timer, select Off.