Download  Print this page

Advertisement

User Manual
ME32B
ME40B
ME46B
ME55B
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00098G-03

Advertisement

Table of Contents

   Also See for Samsung ME32B

   Related Manuals for Samsung ME32B

   Summary of Contents for Samsung ME32B

  • Page 1 User Manual ME32B ME40B ME46B ME55B The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00098G-03...
  • Page 2: Table Of Contents

    Table Of Contents BEFORE USING THE Copyright PRODUCT Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Operation PREPARATIONS Checking the Contents Removing the Packaging Checking the Components Parts Control Panel Reverse Side Anti-theft Lock Remote Control Connection Using an IR Stereo Cable Before Installing the Product (Installation Guide) Tilting Angle and Rotation...
  • Page 3 Table Of Contents CONNECTING AND USING Before Connecting A SOURCE DEVICE Pre-connection Checkpoints Connecting and Using a PC Connecting to a PC Changing the Resolution Connecting an External Monitor Connecting to a Video Device Connection Using the AV Cable Connection Using the Component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable Connecting to an Audio System...
  • Page 4 Table Of Contents What is MDC? Connecting to MDC Connection Management Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide SCREEN ADJUSTMENT Picture Mode If the input source is PC, DVI or DisplayPort If the input source is AV, Component, HDMI or Backlight / Contrast / Brightness /...
  • Page 5 Table Of Contents Advanced Settings Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Color Space White Balance 10p White Balance (Off / On) Flesh Tone Edge Enhancement (Off / On) Motion Lighting (Off / On) LED Motion Plus (Off / On) Picture Options Color Tone Color Temp.
  • Page 6 Table Of Contents Channel Channel Manager Antenna Auto Program Clear Scrambled Channel Fine Tune MagicInfo Lite Videos Playing a Video Photos Viewing a Photo (or Slide Show) Music Playing Music Videos / Photos / Music - Additional Functions Sorting the file lists Videos / Photos / Music Play Option menu Source Source...
  • Page 7 Table Of Contents MagicInfo Lite Settings SYSTEM Plug & Play Multi Control Configuring settings for Multi Control Time Clock Sleep Timer On Timer Off Timer Holiday Management Menu Language Eco Solution Energy Saving Eco Sensor (Off / On) No Signal Power Off Auto Power Off (Off / On) Caption Caption...
  • Page 8 Power On Adjustment Temperature Control Device Name Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto Turn Off (No / Yes) Receiver DivX® Video On Demand Network Remote Control Reset System Reset All SUPPORT Software Upgrade By USB Alternative Software Contact Samsung Table Of Contents...
  • Page 9 Viewing the details of the content that is running Changing the settings for the content that is running TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Table Of Contents...
  • Page 10 Q & A SPECIFICATIONS General PowerSaver Preset Timing Modes License APPENDIX Contact SAMSUNG WORLDWIDE Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Optimum Picture Quality and Afterimage Burn-in Prevention...
  • Page 11: Before Using The Product

    © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
  • Page 12: Cleaning

    Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.
  • Page 13: Safety Precautions

    Before Using the Product Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
  • Page 14: Electricity And Safety

    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
  • Page 15: Installation

    Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.
  • Page 16 Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate. Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. Using the product in an area with excess vibration may damage the product or cause a fire.
  • Page 17: Operation

    Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. Operation Warning There is a high voltage inside the product.
  • Page 18 Before Using the Product If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center. An electric shock or fire may result. Do not let children hang from the product or climb on top of it.
  • Page 19 Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. Product failure, an electric shock or fire may result. Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
  • Page 20 Before Using the Product Looking at the screen too close for an extended period of time can deteriorate your eyesight. Do not use humidifiers or stoves around the product. A fire or electric shock may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved.
  • Page 21 Before Using the Product When replacing the battery, insert it with the right polarity (+, -). Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes.
  • Page 22: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Remove the black locking device at the bottom of the box. Using the grooves in the box, lift and remove the top of the box. Check the components and remove the styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
  • Page 23: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image shown. A stand is not provided with the product. To install a stand, you can purchase one separately. Components Components may differ in different locations.
  • Page 24 Preparations Items sold separately The stand is not supplied. The following items can be purchased at your nearest retailer. Wall-mount Kit RS232C-Stereo cable DVI cable HDMI-DVI cable HDMI cable DP cable RCA stereo cable Video cable LAN cable Stereo cable Component cable RCA cable External sensor Kit...
  • Page 25: Parts

    Preparations Parts 1.2.1 Control Panel The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Keep the area between the remote sensor and remote control obstacle-free. SOURCE MENU Sensor Description Selects the input source that an external device is connected to.
  • Page 26 Preparations Sensor Description Use this button for turning the Display on and off. Receives signals from the remote To control the remote control in front of the product, lower the remote control sensor in the direction of the arrow (indicated in the zoomed-in Remote sensor image on the previous page).
  • Page 27: Reverse Side

    Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. IR / AMBIENT SENSOR IN IR OUT AUDIO RGB / DVI / HDMI AUDIO IN DP IN HDMI IN DVI OUT...
  • Page 28: Anti-theft Lock

    Preparations Assembling the Holder-Wire stand Stand: Sold separately 1.2.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
  • Page 29: Remote Control

    Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Remote control button functions may differ for different products. Power on the product. Power off the product.
  • Page 30 Preparations Adjusting the OSD with the Remote Control Open the OSD menu. Select from Picture, Sound, Media, Network, System Support in the displayed OSD menu screen. Change settings as desired. Finish setting. Close the onscreen display (OSD) menu. To place batteries in the remote control 1 Preparations...
  • Page 31 Preparations Remote Control Reception Range Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left and right. Store used batteries out of reach of children and recycle. Do not use a new and used battery together. Replace both batteries at the same time. Remove batteries when the remote control is not to be used for an extended period of time.
  • Page 32: Connection Using An Ir Stereo Cable

    Preparations 1.2.5 Connection Using an IR Stereo Cable Controlling more than one display product using your remote control AMBIENT AMBIENT SENSOR IN SENSOR IN IR OUT IR OUT Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other display product using the dedicated stereo cable.
  • Page 33: Before Installing The Product (installation Guide)

    Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount. 1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further details. 15 Û The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
  • Page 34: Ventilation

    35 C. Figure 1.1 Side view 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. Figure 1.3 Top view Plane view Minimum 40 mm...
  • Page 35: Dimensions

    Preparations Dimensions Unit: mm (inches) Model name ME32B 733.7 (28.9) 698.4 (27.5) 392.8 (15.5) 430.2 (16.9) 29.9 (1.2) ME40B 921.2 (36.3) 885.6 (34.9) 498.2 (19.6) 536.1 (21.1) 29.9 (1.2) ME46B 1056.3 (41.6) 1018.0 (40.1) 572.6 (22.5) 612.3 (24.1) 29.9 (1.2) ME55B 1246.4 (49.1)
  • Page 36: Installing The Wall Mount

    We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
  • Page 37 Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
  • Page 38: Remote Control

    Preparations Remote Control 1.6.1 Cable Connection RS232C Cable Interface RS232C (9 pins) TxD (No. 2), RxD (No. 3), GND (No. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin assignment 1 2 3 4 5...
  • Page 39 Preparations RS232C cable Connector: 9-Pin D-Sub to Stereo Cable -P1- -P1- -P2- -P2- --------> STEREO Female <-------- PLUG (3.5ø) --------- LAN Cable Pin assignment 1 2 3 4 5 6 7 8 Pin No. Standard Color Signal White and orange Orange White and green Blue...
  • Page 40 Preparations Connector: RJ45 Direct LAN cable (PC to HUB) RJ45 MDC RJ45 MDC Signal Signal <--------> <--------> <--------> <--------> Cross LAN cable (PC to PC) RJ45 MDC Signal Signal <--------> <--------> <--------> <--------> 1 Preparations...
  • Page 41: Connection

    Preparations 1.6.2 Connection Connection 1 RS232C RS232C RS232C RS232C Connection 2 RJ45 RJ45 1 Preparations...
  • Page 42 Preparations Connection 3 RJ45 RS232C RS232C RS232C RS232C 1 Preparations...
  • Page 43: Control Codes

    Preparations 1.6.3 Control Codes Viewing control state (Get control command) Header Command Data length Checksum Command 0xAA type Controlling (Set control command) Header Command Data length Data Checksum Command 0xAA Value type Command Command type Command Value range Power control 0x11 Volume control 0x12...
  • Page 44 Preparations To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control Function A TV/monitor can be powered on and off using a PC. Viewing power state (Get Power ON / OFF Status) Header Command...
  • Page 45 Preparations Volume control Function The volume of a TV/monitor can be adjusted using a PC. Viewing volume state (Get Volume Status) Header Command Data length Checksum 0xAA 0x12 Setting the volume (Set Volume) Header Command Data length Data Checksum 0xAA 0x12 "Volume"...
  • Page 46 Preparations Input source control Function The input source of a TV/monitor can be changed using a PC. Viewing input source state (Get Input Source Status) Header Command Data length Checksum 0xAA 0x14 Setting the input source (Set Input Source) Header Command Data length Data...
  • Page 47 Preparations Header Command Data length Ack/Nak r-CMD Val1 Checksum "Input 0xAA 0xFF ‘A’ 0x14 Source" "Input Source": An input source code to be set on a TV/monitor Header Command Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF ‘N’ 0x14 "ERR" "ERR": A code showing what error has occurred 1 Preparations...
  • Page 48 Preparations Screen Function The screen mode of a TV/monitor can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. This control can only be used on models that include a TV. Viewing screen status (Get Screen Mode Status) Header Command Data length...
  • Page 49: Screen Size Control

    Preparations Screen size control Function The screen size of a TV/monitor can be changed using a PC. Viewing the screen size (Get Screen Size Status) Header Command Data length Checksum 0xAA 0x19 Header Command Data length Ack/Nak r-CMD Val1 Checksum "Screen 0xAA 0xFF...
  • Page 50: Pip On/off Control 0x3c 0~1

    Preparations PIP On/Off control Function The PIP mode of a TV/monitor can be turned on or off using a PC. Only available on models that have the PIP function. The mode cannot be controlled if Video Wall is set to On. This function is not available in MagicInfo.
  • Page 51 Preparations Auto adjustment control (PC and BNC only) Function Automatically adjust the PC system screen using a PC. Viewing auto adjustment state (Get Auto Adjustment Status) None Setting auto adjustment (Set Auto Adjustment) Header Command Data length Data Checksum "Auto 0xAA 0x3D Adjustment"...
  • Page 52: Video Wall Mode Control 0x5c 0~1

    Preparations Video Wall Mode Control Function Video Wall mode can be activated on a TV/monitor using a PC. This control is only available on a TV/monitor whose Video Wall is enabled. This function is not available in MagicInfo. Viewing video wall mode (Get Video Wall Mode) Header Command Data length...
  • Page 53: Safety Lock 0x5d 0~1

    Preparations Safety Lock Function PC can be used to turn the Safety Lock function on or off on a TV/monitor. This control is available regardless of whether or not the power is turned on. Viewing the safety lock state (Get Safety Lock Status) Header Command Data length...
  • Page 54: Connecting And Usinga Source Device

    Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.
  • Page 55: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC.
  • Page 56 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI AUDIO IN When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC to access video and audio content stored on the PC. Connection Using an HDMI Cable HDMI IN 2 Connecting and Using a Source Device...
  • Page 57 Connecting and Using a Source Device Connection Using an DP Cable DP IN 2 Connecting and Using a Source Device...
  • Page 58: Changing The Resolution

    Connecting and Using a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
  • Page 59 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. 2 Connecting and Using a Source Device...
  • Page 60: Connecting An External Monitor

    Connecting and Using a Source Device Connecting an External Monitor DVI OUT (LOOPOUT) AUDIO OUT The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI IN] on another display. Up to Full HD resolution can be supported.
  • Page 61: Connecting To A Video Device

    Connecting and Using a Source Device Connecting to a Video Device Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. You can connect a video device to the product using a cable. Connecting parts may differ in different products.
  • Page 62: Connection Using An Hdmi-dvi Cable

    Connecting and Using a Source Device 2.4.3 Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI HDMI AUDIO IN Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.
  • Page 63 Connecting and Using a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p) For better picture and audio quality, connect to a digital device using an HDMI cable. An HDMI cable supports digital video and audio signals, and does not require an audio cable. To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
  • Page 64: Connecting To An Audio System

    Connecting and Using a Source Device 2.4.5 Connecting to an Audio System AUDIO OUT 2.4.6 Connecting to an Antenna VHF/UHF Antenna ANT IN The initial settings process runs automatically when the product is turned on for the first time after purchase.
  • Page 65: Connecting The Network Box (sold Separately)

    Connecting and Using a Source Device Connecting the network box (Sold separately) Connect the DP-HDMI cable to the [HDMI IN] port on the product and the [MAGICINFO OUT] port on the network box. For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
  • Page 66 Connecting and Using a Source Device Select the default application you want to run when MagicInfo starts. MagicInfo Setup Wizard - v.1.12 Select Application - step 1 MagicInfo Pro (LAN, WAN based version) MagicInfo-i Premium (Web-based version) Select Later < Back(B) Next(N) >...
  • Page 67 Connecting and Using a Source Device Select a language. (The default language is English.) MagicInfo Setup Wizard - v.1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language Engilsh Chinese [Traditional] German English...
  • Page 68 Connecting and Using a Source Device Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version\ 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : English 4. Screen Type : Landscape Do not show again <...
  • Page 69: Changing The Input Source

    Connecting and Using a Source Device Changing the Input source 2.6.1 Source MENU Media Source ENTER Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
  • Page 70: Using Mdc

    Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control MDC Connection Select a method to connect to MDC to receive the MDC signal.
  • Page 71: Mdc Program Installation/uninstallation

    Using MDC MDC Program Installation/Uninstallation 3.2.1 Installation Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. Click "Next"...
  • Page 72: What Is Mdc

    Using MDC What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. RS232C IN / OUT 3 Using MDC...
  • Page 73 Using MDC Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable RJ45 Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB.
  • Page 74: Connection Management

    Using MDC 3.3.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
  • Page 75: Auto Set Id

    Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy- chain running from 1 to 99, and then finally to Set ID 0.
  • Page 76: Cloning

    Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
  • Page 77: Command Retry

    Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window.
  • Page 78: Getting Started With Mdc

    Using MDC 3.3.6 Getting Started with MDC To start the program, click Start Programs Samsung MDC Unified. Click Add to add a display device. If the connection is established via RS232C, go to Serial and specify the COM Port. 3 Using MDC...
  • Page 79 Using MDC If the connection is established via Ethernet, enter the IP that was entered for the display device. 3 Using MDC...
  • Page 80: Main Screen Layout

    Using MDC 3.3.7 Main Screen Layout Change the status of a display device or the properties of the program. Menu Bar View a list of connected display devices or device groups. Device Category View a list of schedules for display devices. Schedule Category Select the display device you want to adjust.
  • Page 81: Menus

    Using MDC 3.3.8 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power On: Power on a selected display.
  • Page 82 Using MDC Alert Fault Device This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor error, or lamp error. Select a display device from the list. The Repair button will be enabled. Click the refresh button to refresh the error status of the display device.
  • Page 83: Screen Adjustment

    Using MDC 3.3.9 Screen Adjustment The screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. Color and Tint are not available if the input source is PC. Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video.
  • Page 84 Using MDC Blue Customize the intensity of blue color for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma value for the selected display. Auto Motion Plus This option is used to view dynamic images. Off: Disable the Auto Motion Plus function.
  • Page 85 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration. The -/+ buttons can be used to adjust Zoom. The screen can be relocated using the up/down/left/right buttons.
  • Page 86: Sound Adjustment

    Using MDC 3.3.10 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display.
  • Page 87: System Setup

    Using MDC 3.3.11 System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple display devices.
  • Page 88 Using MDC Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Select the number of vertical display devices. A maximum of 15 displays can be arranged in a row.
  • Page 89 Using MDC Basic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON. Note that Picture Size is disabled when PIP is ON. PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source.
  • Page 90 Using MDC General User Auto Color Automatically adjust the screen colors. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan &...
  • Page 91 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed.
  • Page 92 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Time: Set the time to power on the selected display device. Off Time: Set the time to power off the selected display device.
  • Page 93 Using MDC Once: Activate the timer only one time. EveryDay: Activate the timer every day. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat: Activate the timer from Monday through Saturday. Sat~Sun: Activate the timer on Saturdays and Sundays. Manual: Customize days of the week. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
  • Page 94 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Interval: Set the interval to activate the Screen Saver.
  • Page 95 Using MDC Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
  • Page 96: Tool Settings

    Using MDC 3.3.12 Tool Settings Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings.
  • Page 97 Using MDC Edit Column Select the items you want to display in the list of sets. Information View the program information. 3 Using MDC...
  • Page 98: Other Functions

    Using MDC 3.3.13 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window. 3 Using MDC...
  • Page 99 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. Right-click and select Group Edit in the display device list section on the left side of the program window.
  • Page 100 Using MDC Add on the sub level: Create a sub-group under the selected group. Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes. The group will be deleted. Renaming Groups Select a group name, and click Edit.
  • Page 101 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. Click the Add button.
  • Page 102 Using MDC Click Add below the Device Group item, and select the group you want to add a schedule to. Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. Device Group: Select a group.
  • Page 103: Troubleshooting Guide

    Using MDC 3.3.14 Troubleshooting Guide Issue Solution The display you want to control Check the connection of the RS232C cable (check that the does not appear on the system cable is properly connected to appropriate serial port). information chart. Check that another display with a duplicate ID is not connected.
  • Page 104 Using MDC How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3.
  • Page 105: Screen Adjustment

    Screen Adjustment Configure the Picture settings (Brightness, Color Tone, etc.). The layout of the Picture menu options may vary depending on the product. Picture Mode MENU Picture Picture Mode ENTER Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
  • Page 106: Backlight / Contrast / Brightness / Sharpness / Color / Tint (g/r)

    Screen Adjustment Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) MENU Picture ENTER Your monitor has several options for adjusting picture quality. Select an option using the arrow keys, and then press [ ]. Use the arrow keys to adjust the option value or select an option setting. When done, press [ When you make changes to Backlight, Contrast, Brightness, Sharpness, Color...
  • Page 107: Picture Size

    Screen Adjustment Screen Adjustment MENU Picture Screen Adjustment ENTER Screen Adjustment provides various picture size and aspect ratio options. Select an option using the arrow keys, and the press [ ]. Use the arrow keys to select an option in the sub-menu, and then press [ Different Screen Adjustment...
  • Page 108 Screen Adjustment Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty.
  • Page 109: Position

    Screen Adjustment 4.3.2 Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen fit or Custom. To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen fit or Custom, follow these steps.
  • Page 110: Resolution Select

    Screen Adjustment 4.3.4 Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: 1024 x 768 1280 x 768...
  • Page 111: Advanced Settings

    Screen Adjustment Advanced Settings MENU Picture Advanced Settings ENTER Advanced Settings are available in the Standard Movie modes. To use, select an option using the up and down arrow keys, and then press [ ]. Use the arrow keys to change the value or setting, and then press [ mode, you can only make changes to Gamma...
  • Page 112: Gamma

    Screen Adjustment 4.5.4 Gamma Adjust the primary color intensity. 4.5.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the Expert Pattern screen disappears.
  • Page 113: White Balance (off / On)

    Screen Adjustment 4.5.9 10p White Balance (Off / On) Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level.
  • Page 114: Picture Options

    Screen Adjustment Picture Options MENU Picture Picture Options ENTER Select an option using the arrow keys, and the press [ ]. Use the arrow keys to change the setting, and then press [ mode, you can only make changes to the Color Tone.
  • Page 115: Digital Noise Filter

    Screen Adjustment 4.6.3 Digital Noise Filter If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. Medium High Auto Auto Visualization Auto Visualization: When changing analog channels, displays signal strength.
  • Page 116: Reset Picture

    Screen Adjustment Smooth : Sets Auto Motion Plus Smooth (suitable for viewing moving images naturally) mode. Custom : Use to reduce the afterimage and judder as much as you want. Demo : Demonstrates Auto Motion Plus (the picture will be displayed on the left half of the screen when Auto Motion Plus is set to On).
  • Page 117: Sound Adjustment

    Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU Sound Sound Mode ENTER Use the up and down arrow keys to select an option, and then press [ Sound Sound Mode Standard Sound Effect Broadcast Audio Options Speacker Settings Reset Sound The displayed image may differ depending on the model.
  • Page 118: Sound Effect

    Sound Adjustment Sound Effect MENU Sound Sound Effect ENTER Speaker Select is set to External, Sound Effect is disabled. Available only when Sound Mode is set to Standard. SRS TruSurround HD (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
  • Page 119: Broadcast Audio Options

    Sound Adjustment Broadcast Audio Options MENU Sound Broadcast Audio Options ENTER Preferred Language (digital channels only) Use the up and down arrow keys to select a language, and then press [ Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program into foreign languages).
  • Page 120: Speaker Settings

    Sound Adjustment Speaker Settings MENU Sound Speaker Settings ENTER Speaker Select (External / Internal) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver.
  • Page 121: Media

    Media Favorites MENU Media Favorites ENTER View all of your favorite channels. Media Favorites Channel MagicInfo Lite Videos Photos Music Source The displayed image may differ depending on the model. Your favorite channels are organized in up to five groups (Favorites 1 - 5).
  • Page 122: Functions On The Favorites Screen

    Media 6.1.1 Functions on the Favorites Screen To access the functions listed below, use the arrow buttons to move the cursor to the icon of your choice on the top right corner of the screen, and then press [ View Mode : Toggles between the Text view and Thumbnail view of your favorite channels.
  • Page 123: Channel

    Media Channel MENU Media Channel ENTER Using the Channel function, you can add channels, delete Added channels, set Favorite channels, use the program guide for digital broadcasts and change between the All Channels Added Ch. screen. You can also change the antenna or channel settings by selecting the icons in the top right corner of the screen.
  • Page 124 Media Using Edit Mode to Delete a Channel from the Channel List Select the Edit Mode icon on the upper right of your screen, and then press the [ ] button. Press the / / / buttons to select a channel, and then press [ ].
  • Page 125 Media Delete only appears if you have selected an added channel on the Added Ch. All Channels list. You can also delete a channel on the All Channels list. Added channels are bright. Deleted channels are dim. To delete an Added channel on the All Channels list, select a bright channel, press the...
  • Page 126: Antenna

    Media 6.2.2 Antenna MENU Media Channel Antenna ENTER Your TV memorizes channels and adds the memorized channels to the Channel. Before your TV can memorize channels, you must specify the signal source, either or Cable. If you select cable, when you start Auto Program, you must also specify the cable system type, STD, HRC, or IRC.
  • Page 127: Clear Scrambled Channel

    Media 6.2.4 Clear Scrambled Channel MENU Media Channel Clear Scrambled Channel ENTER This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. How to Stop the Clear Scrambled Channels function Press the [ ] button to select Stop.
  • Page 128: Magicinfo Lite

    Media MagicInfo Lite MENU Media MagicInfo Lite ENTER Press the MagicInfo Lite button on the remote control. MagicInfo Lite Player allows you to play content (image, video, document files) at a desired time. You can play content saved in internal memory or USB memory. You can also play content via MagicInfo Lite Server after connecting to a network.
  • Page 129 Media Supported Video Subitle Formats (for language subtiles, etc.) Name File extension Format MPEG-4 time-based text .ttxt SAMI HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based Supported Video Formats Frame rate Bit rate File Audio Container Video Codec Resolution...
  • Page 130 Media Frame rate Bit rate File Audio Container Video Codec Resolution Extension Codec (fps) (Mbps) MPEG1 352 x 288 24 / 25 / 30 AC3 / *.vro MPEG / MPEG2 1920 x 1080 24 / 25 / 30 LPCM MPEG1 352 x 288 24 / 25 / 30 AC3 /...
  • Page 131 Media Using the Play Continuously Function (Resume Play) If you exit a movie when it is playing, you can play the movie later from the point where you stopped it. Resume function does not support multiple users. (It will only memorize the point where the most recent user stopped playing.) Select the movie file you stopped and want to resume by pressing the button.
  • Page 132: Photos

    Media Photos MENU Media Photos ENTER Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 133: Music

    Media Music MENU Media Music ENTER Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the Connected Device screen appears.
  • Page 134 Media Playing My Playlist Select the My Playlist folder and it will play automatically. Press the button to play a different music file within the play list. To delete a file from Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ].
  • Page 135: Videos / Photos / Music - Additional Functions

    Media Videos / Photos / Music - Additional Functions 6.7.1 Sorting the file lists To sort files in the file lists, select the (Sorting) icon in the top right of the screen by using the / / / button. Then, press the [ ] button.
  • Page 136: Videos / Photos / Music Play Option Menu

    Media 6.7.2 Videos / Photos / Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. Below are a series of tables listing the options available and the media each option applies to. Option Name Operations Videos...
  • Page 137 Media Option Name Operations Videos Photos Music Start Slide Show You can start or stop a slide show. Stop Slide Alternatively, use the button on the Show remote. Slide Show You can select the slide show speed during Speed the slide show. Alternatively, use the button on the remote.
  • Page 138: Source

    Media Source MENU Media Source ENTER Source allows you to select a variety of sources and change source device names. 6.8.1 Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
  • Page 139: Edit Name

    Media 6.8.2 Edit Name MENU Media Source TOOLS Edit Name ENTER You can rename a connected source device. Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.
  • Page 140: Network

    Network Network Setting 7.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.
  • Page 141: Wired Network Settings

    Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection.
  • Page 142 Network Automatic Network Settings Use the Automatic Network Settings when connecting your product to a network that supports DHCP. To set up your product cable network connection automatically, follow these steps. How to set up automatically Go to the Network Settings screen.
  • Page 143 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. When done entering the Address, press [ Press the down arrow key to go to the Subnet Mask fields, and then press [...
  • Page 144: Connecting To A Wireless Network

    Network 7.1.3 Connecting to a Wireless Network To connect your product to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port.
  • Page 145: Wireless Network Setting

    WPS (PBC) One Foot Connection The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable other than the cable supplied with the product. 7.1.4 Wireless Network Setting...
  • Page 146 Network Manual Network Setup Use the Manual Network Settings when connecting your product to a network that requires a Static IP address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. Right click the Network icon on the bottom right of the screen.
  • Page 147: Wps(pbc)

    Network Repeat the entry process for each field in the Address. If you make a mistake when entering a number, re-enter the number to correct it. You can also press the button to change the number one unit at a time. When done entering the Address, press [ Press the...
  • Page 148: One Foot Connection

    This Priority QOS function is unique to Samsung wireless routers. You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD players etc. But, when you connect a Samsung product to a Samsung wireless router, the Samsung wireless router gives the Samsung product a priority connection.
  • Page 149: Ad Hoc Network Setup

    Network 7.1.7 Ad Hoc Network Setup You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP through the product. How to set up using Ad hoc Go to Network Settings screen. Select Wireless (General), and press [ ], then press [ ] again.
  • Page 150: Network Status

    Network Network Status MENU Network Network Status ENTER You can check the current network and Internet status. Network Network Settings Network Status MagicInfo Lite Settings The displayed image may differ depending on the model. 7 Network...
  • Page 151: Magicinfo Lite Settings

    Network MagicInfo Lite Settings MENU Network MagicInfo Lite Settings ENTER Server Setting the MagicInfo Lite Server IP Enter the server IP address and port number. Use 7001 as the port number. If unable to connect to the server using port number 7001, check with your server administrator to find the correct port number and then change the port number.
  • Page 152: System

    System Plug & Play MENU System Plug & Play ENTER When the product is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the [ ] button. Plug & Play is available only when the Input Source is set to TV.
  • Page 153: Multi Control

    System Multi Control MENU System Multi Control ENTER Assign an individual ID to your product. 8.2.1 Configuring settings for Multi Control MDC Connection Select a method to connect to MDC to receive the MDC signal. RS232C MDC Communicate with MDC via the RS232C-stereo cable. RJ45 MDC Communicate with MDC via the RJ45 cable.
  • Page 154: Time

    System Time MENU System Time ENTER You can configure Clock Set Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 8.3.1 Clock Set the clock to use the various various timer features of the product. Changing the Setting for Clock Clock Mode Set the current time manually or automatically.
  • Page 155: Sleep Timer

    System 8.3.2 Sleep Timer Automatically shuts off the product after a preset period of time. (Off, min, min, min, min, 150 min min). Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer, select Off.
  • Page 156: Off Timer

    System 8.3.4 Off Timer You can set up three separate Off Timer configurations. (Off Timer Off Timer Off Timer You must set the clock before you can use Timer. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product.
  • Page 157: Menu Language

    System Menu Language MENU System Menu Language ENTER Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. Eco Solution MENU System Eco Solution...
  • Page 158: Eco Sensor (off / On)

    System 8.5.2 Eco Sensor (Off / On) To enhance your power savings, the picture settings will automatically adapt to the light in the room. If you adjust Backlight in the Picture menu, Eco Sensor will be set to Off. Min. Backlight: When Eco sensor is On, you can manually adjust the minimum screen brightness.
  • Page 159: Caption

    System Caption MENU System Caption ENTER (On-Screen Text Messages) 8.6.1 Caption You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. Caption feature does not work with devices connected to the product through the Component, HDMI input jacks.
  • Page 160: Digital Caption Options

    System 8.6.3 Digital Caption Options (digital channels only) Adjusts the each option. When done, select Close. Size: Options include Default, Small, Standard and Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7. The default is Style 0. Foreground Color: You can change the color of the letters.
  • Page 161: Security

    System Security MENU System Security ENTER Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". The PIN screen closes and the Security menu appears. Security Safety Lock Button Lock Program Rating Lock Change PIN The displayed image may differ depending on the model.
  • Page 162: Program Rating Lock (off / On)

    System 8.7.3 Program Rating Lock (Off / On) When turned on, the Program Rating Lock feature can automatically block programs that you deem inappropriate for your children. You must enter a PIN (personal identification number) before you can set or change any of the Program Rating Lock restrictions.
  • Page 163 System Canadian English Rating: You can block TV programs based on their Anglophone Canadian rating. Canadian English Rating displays a column with locks and the following ratings categories. C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.
  • Page 164: Change Pin

    System 8.7.4 Change PIN Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Re- enter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close button.
  • Page 165: Auto Protection Time

    System Size ): Select a size for the subpicture. Position ): Select a position for the sub-picture. In Double ( ) mode, you cannot select Position. Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the picture.
  • Page 166: Screen Burn Protection

    System 8.10 Screen Burn Protection MENU System Screen Burn Protection ENTER To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to program the time between movements of the picture in minutes.
  • Page 167: Pixel

    System 8.10.2 Timer You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. Mode: You can change the Safety Screen Type. Period: Use this function to set the execution period for each mode set in the timer.
  • Page 168: Video Wall

    System 8.11 Video Wall MENU System Video Wall ENTER Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide.
  • Page 169: Format

    System 8.11.2 Format Select a format to display images on multiple displays. Full: Display images in full screen. Natural: Display images at the original resolution without enlarging or reducing. Format option is only enabled when Video Wall is set to On. 8.11.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays.
  • Page 170: Screen Position

    System 8.11.5 Screen Position You can customize the arrangement of split screens by moving displays identified with a number using Screen Position function. Select Screen Position to display the arrangement of displays (identified with a number) specified according to the Horizontal or Vertical settings. To customize the arrangement, move a number (display) using the direction buttons on the remote control and press [ A maximum of 100 displays can be arranged in Screen...
  • Page 171: Source Autoswitch Settings

    System 8.12 Source AutoSwitch Settings MENU System Source AutoSwitch Settings ENTER Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Source AutoSwitch When the Source AutoSwitch...
  • Page 172: General

    System 8.13 General MENU System General ENTER General Max. Power Saving Game Mode BD Wise Auto Power Standby Control Auto Lamp Schedule OSD Display The displayed image may differ depending on the model. 8.13.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
  • Page 173: Bd Wise

    System 8.13.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Available when you connect Samsung products that support...
  • Page 174: Power On Adjustment

    System 8.13.8 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.13.9 Temperature Control This function detects the internal temperature of the product.
  • Page 175: Anynet+ (hdmi-cec)

    Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. You can only control Anynet+ devices using the product remote control, not the buttons on the product.
  • Page 176: Auto Turn Off (no / Yes)

    System Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product. Anynet+ Menu Description View PC Changes Anynet+ mode to PC mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the menu of the connected device menus.
  • Page 177: Receiver

    System If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. 8.14.3 Receiver You can listen to sound through a Receiver (i.e.
  • Page 178: Divx® Video On Demand

    System Problem Possible Solution The message “Connecting to You cannot use the remote control when you are configuring Anynet+ device...” appears on Anynet+ or switching to a view mode. the screen. Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
  • Page 179: Network Remote Control

    System Network Remote Control ENTER Turn on/off or give permission to Samsung mobile phone devices to connect with and control the product. You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual.
  • Page 180: Support

    9.1.1 By USB To upgrade by USB, follow these steps. Visit www.samsung.com. Download the latest USB software upgrade exe archive to your computer. Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file.
  • Page 181: Alternative Software

    ] button. The TV displays a message asking if you want to upgrade. Select Yes. The TV begins the upgrade. When the upgrade is complete, the TV turns off automatically, and then turns on. Contact Samsung MENU Support Contact Samsung ENTER View this information when your TV does not work properly or when you want to upgrade the software.
  • Page 182: Magicinfo Lite

    MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player [Read before using MagicInfo Lite Player] Supported USB-device file systems include FAT16 and FAT32. (NTFS is not supported.) A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.
  • Page 183 MagicInfo Lite Frame Bit rate Audio File Container Video Codec Resolution Extension rate(fps) (Mbps) Codec H.264 BP / MP 1920 x 1080 6 ~ 30 MP3 / / HP *.mp4 ADPCM / MPEG4 SP / 1920 x 1080 6 ~ 30 H.264 BP / MP 1920 x 1080 6 ~ 30...
  • Page 184 MagicInfo Lite Audio Audio content without video is not supported. (Only mp3 files are supported as background music for image/PPT slideshows. This feature is available only when using the network schedule menu.) Audio content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy audio during playback.
  • Page 185 MagicInfo Lite Power Point Compatible document file formats Extension : ppt, pptx Version : Office 97 ~ Office 2007 Functions not supported Animation effect 3D shapes (which will be displayed in 2D) Header and footer (some subitems are not supported) Word Art Align (A group alignment error may occur) Office 2007 (SmartArt is not fully supported.
  • Page 186: Network Schedule

    MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server Network setup To run MagicInfo Lite, connect to a network. Refer to 140 page for details about the Network Settings menu. Server setup Go to MENU Network MagicInfo Lite Settings Server.
  • Page 187: Magicinfo Lite Settings

    MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU Media MagicInfo Lite ENTER Press the MagicInfo Lite button on the remote control. You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view whether the server is connected when a network schedule is running, press INFO on the remote.
  • Page 188 MagicInfo Lite Select Device from the top menu bar. Select Lite Device from the menus on the left. Select View Unapproved Lite Device from the sub-menus of Lite Device. Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network schedule is running will display the...
  • Page 189 MagicInfo Lite Enter the information required to approve the device. Device Name: Enter the device name. Device Model Name: Select your device model. Device Group: Select to specify the group. Location: Enter the current location of the device. Select the View All Lite Device menu to check that the device has been registered.
  • Page 190: Setting The Current Time

    MagicInfo Lite 10.2.4 Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Go to the tabs Device Time. Select your device. Select Clock Set, and sync the time with the server. For further details on how to manage the time (scheduling, holiday management, etc.), refer to the <MagicInfo server user's manual>.
  • Page 191: Local Schedule

    MagicInfo Lite 10.3 Local Schedule Run a schedule created by Local Schedule Manager. Go to Local Schedule Manager Select the content you want to run This menu is disabled if no schedule was created by Local Schedule Manager. Select Local Schedule Manager in the MagicInfo Lite menu screen.
  • Page 192 MagicInfo Lite Select Create in the Local Schedule Manager screen. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete Info Close Select Time to set the time you want to play content. Create Time Contents Time --:-- am ~ --:-- pm Save Contents No Item...
  • Page 193 MagicInfo Lite Select the memory space you want to save the content to. Create Delete Time 12:00 am ~ 02:00 pm Conten Where do you want to save? Time Save Conten ancel Internal Cancel Check that the schedule has been added to the Local Schedule Manager.
  • Page 194: Modifying A Local Schedule

    MagicInfo Lite 10.4.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected...
  • Page 195: Deleting A Local Schedule

    MagicInfo Lite Select Edit. Edit Delete Time 12:00 am ~ 02:00 pm Contents Menu1.jpg Time --:-- am ~ --:-- pm Save Contents No Item Cancel Time --:-- am ~ --:-- pm Contents No Item Change the details of the local schedule. Next, select Save. 10.4.3 Deleting a Local Schedule Ensure at least one Local Schedule...
  • Page 196 MagicInfo Lite Select the local schedule you want to delete. Local Schedule Manager Create Storage Internal Memory Edit No Playing Schedule Delete 20110101_1200.Isch Info Close Select Delete. Local Schedule Manager Create Storage Internal Memory Edit Do you want to delete schedule? elete Info Close...
  • Page 197: Running A Local Schedule

    MagicInfo Lite 10.4.4 Running a Local Schedule Ensure at least one Local Schedule is registered. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected...
  • Page 198: Stopping A Local Schedule

    MagicInfo Lite 10.4.5 Stopping a Local Schedule Selecting will change the running This function is enabled only when a schedule is running. Stop mode from local schedule to network schedule. Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager...
  • Page 199: Viewing The Details Of A Local Schedule

    MagicInfo Lite 10.4.6 Viewing the details of a Local Schedule Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the local schedule you want to view the details of.
  • Page 200: Copying Content

    MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the content you want to copy. If content under Internal Memory is selected: You can copy the content under...
  • Page 201: Deleting Content

    MagicInfo Lite 10.5.2 Deleting content Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected Select the content you want to delete. Content under Internal Memory memory can be deleted at the same time.
  • Page 202: Internal Autoplay

    MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory. Select Internal AutoPlay in the MagicInfo Lite menu screen. Play content, which has been copied to , in alphabetical order. Internal Memory Network Schedule Local Schedule Local Schedule Manager...
  • Page 203: When Content Is Running

    MagicInfo Lite USB AutoPlay will automatically run if USB memory is connected when Network Schedule Local Schedule is running. Network Schedule Local Schedule Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server Network Schedule Connected Disconnected 10.8 When Content is Running 10.8.1 Viewing the details of the content that is running Press the INFO...
  • Page 204: Changing The Settings For The Content That Is Running

    MagicInfo Lite Schedule Download: Displays the progress of a network schedule being downloaded from the server Information Software Version : A-VNUSCDSP-100 Device Name : Monitor Device ID : FE-FF-FF-FF-FF Mode : Network Schedule Server : Connected : Connected Schedule Download : No Schedule to download Close 10.8.2 Changing the settings for the content that is running...
  • Page 205: Troubleshooting Guide

    11.1 Requirements Before Contacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 206: Check The Followings

    Troubleshooting Guide 11.1.3 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. ("2.2 Connecting and Using a PC") Blank spaces are found at the top and bottom Blank spaces on the screen are not caused by of the screen when an HDMI or HDMI-DVI the product.
  • Page 207 Troubleshooting Guide Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range There are shadows or ghost images left on the...
  • Page 208 Troubleshooting Guide Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity.
  • Page 209 Troubleshooting Guide 11.2 Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? "Windows XP": Go to Control Panel Appearance and Themes Display Settings Advanced Monitor and adjust the frequency in Monitor Settings. "Windows ME/2000": Go to Control Panel Display Settings...
  • Page 210 Troubleshooting Guide Question Answer How can I change the "Windows XP": Go to Control Panel Appearance and resolution? Themes Display Settings and adjust the resolution. "Windows ME/2000": Go to Control Panel Display Settings and adjust the resolution. "Windows Vista": Go to Control Panel Appearance and Personalization Personalize...
  • Page 211: Specifications

    41.6 x 24.1 x 1.2 inches / 27.6 Ibs 49.1 x 28.3 x 1.2 inches / 37.7 Ibs VESA 400 x 400 mm / 15.7 x 15.7 inches Model Name ME32B / ME40B / ME46B / ME55B Display Color 1.07B Synchronization Horizontal 30 ~ 81 kHz...
  • Page 212 Specifications Model Name ME32B / ME40B / ME46B / ME55B Environmental Operating Temperature : 32˚F ~ 104˚F (0˚C ~ 40˚C) considerations Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C) Humidity : 5 % ~ 95 %, non-condensing Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems.
  • Page 213: Powersaver

    Power-savign mode only functions when the product is connected to a PC with a power-saving function. Normal Operation Power off State Power saving mode (Power Button) Rating Typical Power Indicator Blinking ME32B 64 W 39 W Power ME40B 92 W 54 W Consumption Less than 1 W Less than 1 W (Without Network...
  • Page 214: Preset Timing Modes

    Specifications 12.3 Preset Timing Modes This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
  • Page 215 Specifications Sync Horizontal Vertical Pixel Clock Polarity Display Mode Frequency Frequency (MHz) (kHz) (Hz) (H/V) VESA, 1366 x 768 47.712 59.790 85.500 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900(RB) 60.000 60.000 108.000 VESA, 1680 x 1050 65.290 59.954 146.250...
  • Page 216: License

    Specifications 12.4 License TheaterSound HD, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under license form SRS Lab, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double- D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S.
  • Page 217: Appendix

    Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA...
  • Page 218: Responsibility For The Pay Service (cost To Customers)

    If a product damage is caused by; external impact or drop. use of supplies or separatly sold product unspecified by Samsung. repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. remodeling or repairing the product by customer.
  • Page 219: Optimum Picture Quality And Afterimage Burn-in Prevention

    Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LED panel. This does not affect product performance. The number of sub-pixels by LED panel type: ME32B, ME40B, ME46B, ME55B : 6,220,800 "Auto Adjustment"...
  • Page 220: Prevention Of Afterimage Burn-in

    Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
  • Page 221 Appendix Powering Off, Screen Saver and Power Saving Mode Power off the product for 2 hours after using it for 12 hours. Go to Display Properties > Power Supply on your PC and set the product to power off as required.
  • Page 222: Terminology

    Appendix Terminology Dot Pitch The product and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. Dot pitch refers to the distance between the shortest distance between dots of the same color. Dot pitch is measured in millimeters. Vertical Frequency The product displays a single image many times per second (like a fluorescent light that flickers) to display an image for a viewer to see.
  • Page 223 Appendix Multiple Display Control (MDC) MDC (Multiple Display Control) is an application that allows multiple display devices to be controlled simultaneously using a PC. Communication between a PC and monitor takes place using RS232C (serial data transmission) and RJ45 (LAN) cables. DVD (Digital Versatile Disc) DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game) applications using MPEG-2 video compression technology.
  • Page 224 No Signal Power Off Batteries PC connection Photos Picture Mode Caption Picture Size Change PIN Clock Mode Plug & Play Contact SAMSUNG WORLDWIDE Port Custom settings screen Problem report Eco Solution Remote Control Edit Name Reset All Energy Saving Resolution configuration...
  • Page 225 Index What is MDC? Wired Network WPS(PBC) Index...

This manual is also suitable for:

Me55bMe46bMe40b

Comments to this Manuals

Symbols: 0
Latest comments: