Samsung ML32E User Manual page 22

Chapter 2. Device setup
Wall mount kit specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the
wall mount to surfaces other than plaster board, please contact your nearest dealer
for additional information.
WARNING
If you install the product on a slanted wall, it may fall and result in severe personal
injury.
A
B
• Samsung wall mount kits contain a detailed installation manual and all parts
necessary for assembly are provided.
• For wall mounts that do not comply with the VESA standard screw specifications, the
length of the screws may differ depending on the wall mount specifications.
• Standard dimensions for wall mount kits are shown in the table below.
Model name VESA screw hole specs (A * B) in
millimeters
ML32E 200.0 mm * 200.0 mm
ML55E / ML55E-R 400.0 mm * 400.0 mm
Unit: mm
Standard screw Quantity
M8 4
WARNING
• Do not fasten the screws too firmly. This may damage the product or cause the
product to fall, leading to personal injury. Samsung is not liable for these kinds
of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA
or non-specified wall mount is used or the consumer fails to follow the product
installation instructions.
CAUTION
• Always have two people mount the product on a wall.
• Do not use screws that are longer than the standard length or do not comply
with the VESA standard screw specifications. Screws that are too long may cause
damage to the inside of the product.
• Do not install your Wall Mount Kit while your product is turned on. It may result
in personal injury due to electric shock.
22