Samsung ML32E User Manual page 35

Chapter 2. Device setup
Connection using an HDMI cable
The appearance may differ depending on the product.
HDMI IN
Connection using an DP cable
The appearance may differ depending on the product.
DP IN
Precautions for using DP
• To increase the standby power capacity, the product stops DP communication when
it is turned off or in power saving mode.
If the product in dual monitor mode is turned off or goes into power saving mode,
monitor setting changes may not be updated. As a result, screen output may not be
displayed properly.
In the occurrence of this issue, set Max. Power Saving
product.
• Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power
saving mode. If this is the case, make sure to turn on the product first before turning
on your PC.
• The DisplayPort interface (DP IN) on the product and the provided DP cable are
designed based on the VESA standards. Using a DP cable that is not VESA compliant
may cause the product to function improperly. Samsung Electronics shall not be
held responsible for any issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
35
to Off before using the