Network Setting (Wireless) - Samsung ML32E User Manual

Chapter 5. Menu

Network Setting (Wireless)

Connecting to a Wireless Network
LAN port on the
wall
Wireless IP sharer
(router having DHCP
server)
LAN cable
Samsung recommends using IEEE 802.11n. When you play video over a network
connection, the video may not play smoothly.
• Select a channel for the wireless IP sharer that is not currently being used. If the
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
• Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless
router, Samsung products will not support a connection in compliance with new Wi-
Fi certification specifications.
• If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to
the network via PBC (Push Button Configuration) or PIN (Personal Identification
Number). WPS will automatically configure the SSID and WPA key in either mode.
• Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices
that access the network to transmit an encrypted security code called an Access or
Security Key. The Security Key is based on a Pass Phrase, typically a word or a series
of letters and numbers of a specified length you were asked to enter when you set up
security for your wireless network. If you use this method of setting up the network
connection, and have a Security Key for your wireless network, you will have to enter
the Pass Phrase during the the automatic or manual setup process.
How to set up automatically
1 Set Network type to Wireless from the
2 The Network function searches for available wireless networks. When done, it
displays a list of the available networks.
3 In the list of networks, press the  or  button to select a network, and then press
the button twice.
‒ If the desired wireless router does not appear, select
‒ If the router cannot be found after retrying, select the
The Add Network button appears.
4 If the Enter password. screen appears, go to step 5. If you select a wireless router
that does not have security, go to step 7.
5 If the router has security, enter the
6 When done, use the right arrow button to move the cursor to Done, and then press
. The network connection screen appears and the verification process starts.
‒ If the product cannot connect to the Internet even though it is connected to a
router, check if the Internet connection of the router.
7 When the connection has been verified, the
connection are setup and ready to
Network Settings page.
Refresh to search again.
Stop button.
Enter password. (Security key or PIN).
"Your wireless network and Internet
use." message appears.
75