The power saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used for a

specified period of time. The power is not turned off in power saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power saving mode

only functions when the product is connected to a PC with a power saving function.

• The displayed power consumption level can vary in different operating conditions or when settings are changed.

• SOG(Sync On Green) is not supported.

• To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product for an

extended period of time (during vacation, etc.).

Preset timing modes

This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified

resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.

Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical frequency to 60Hz

using the CDT product before you exchange it with the LCD product.

Model Name

Synchronization

Horizontal frequency

Vertical frequency

Resolution

Optimum resolution

Maximum resolution

ML32E / ML55E / ML55E-R

30 - 80 kHz

60 - 75 Hz

1920 x 1080 @ 60 Hz