Lorex LNZ3522 Instruction Manual page 24

5
Installation
2. Drill holes for the mounting screws, drywall anchors (optional) and camera
cable.
•
•
3. Align the metal mounting plate so that the 3 screw holes in the plate line
up with the 3 holes drilled in the ceiling. Attach the flat side of the metal
mounting plate to the mounting surface using the included mounting
screws (3x).
1. Drywall anchors (3x — optional); 2. Mounting screws (3x); 3. Mounting
surface; 4. Metal mounting plate
4. Remove the M2x5 screw from the side of the camera using the included
Allen key.
5. Connect the camera cables as shown in 4 Connecting the Camera, page
4.
#LX400043; r. 2.0/40122/40365; en-US
NOTE
Use the included drywall anchors if installing on a drywall surface.
If you are planning on running the cables along the mounting surface, there is no
need to drill a hole for the camera cable.
18