Lorex LNZ3522 Instruction Manual page 11

4
Connecting the Camera
PoE (Power over Ethernet) is a technology that allows Ethernet cables to carry
electrical power to connected devices. Compatible NVRs use integrated PoE
ports to provide power and Pan-Tilt commands to the camera, as well as vid-
eo connection to the NVR. In order to use PoE with this IP camera, you must
connect it directly to a compatible NVR (visit
www.lorextechnology.com/compatibility
switch on the same network as the NVR.
PoE switches are available for purchase on www.lorextechnology.com.
Complete the following steps to connect the camera to the NVR over the LAN.
Step 1 of 2 — OPTION A: Connecting the camera to your local network
using an optional PoE switch:
1. Connect an Ethernet cable of up to 300ft (91m) rated CAT5e or higher
(not included) from the LAN port on an external PoE switch (sold sepa-
rately on www.lorextechnology.com) to your router. Connect the power ca-
ble to the PoE switch and to a power outlet or surge protector.
Terminology may vary depending on the model of PoE switch you have.
#LX400043; r. 2.0/40122/40365; en-US
NOTE
for full compatibility details) or a PoE
5