Lorex LNZ3522 Instruction Manual page 19

5
Installation
6. Align the 3 notches on the side of the dome camera with the 3 correspond-
ing pegs on the metal mounting plate. Push the camera gently into the
mounting plate until you hear a 'click'.
If you are drilling a hole for the camera
cable, ensure that you run the cable
through the cable hole in the metal
mounting plate. See image below for
reference:
1. Pegs (3x); 2. Notches (3x)
#LX400043; r. 2.0/40122/40365; en-US
CAUTION
If you run the cables along the mounting
surface, you must run the cable through
the cable notch on the camera base
and underneath the metal mounting
plate. The camera cable will hang
alongside the mounting bracket — see
image below for reference:
13