Recycling - Nederman 300E Series Instruction Manual

EN 300E Series
11

Recycling

The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.
Most 300E components (81% of the total weight) can be recycled when
scrapping the unit. There are two metallic threaded inserts in the frame. They
must be removed prior to recycling. Most of the plastic parts are labelled to
facilitate sorting. Components that at present cannot suitably be recycled can
be identified according to Figure 13.
In order to meet official requirements, American variants of the 300E with
1-phase motor contain flameproofed components in the power unit and these
contain small amounts of bromine. Bromine is classified as hazardous to health
and must be dealt with according to local directions when scrapping.
16