Accessories; Weld-In Adapter; Plug-In Jack, Cable - Endress+Hauser Liquiphant FTL31 Manual

Liquiphant FTL31

Weld-in adapter

Plug-in jack, cable

Endress+Hauser

Accessories

Various weld-in adapters are available for installation in vessels or pipes.
The adapters are optionally available with inspection certificate 3.1 EN10204.
View (example)
1 Leakage hole
If installed horizontally and weld-in adapters with a leakage hole are used, ensure that the leakage
hole is pointing down. This allows leaks to be detected as quickly as possible.
Detailed information can be found in TI00426F/00/EN "Weld-in adapter and flanges" and in
the supplementary documentation (→  29).
The plug-in jacks listed are suitable for use in the temperature range
–25 to +70 °C (–13 to +158 °F).
Engineering unit mm (in)
Plug-in jack M12 IP67
40
³
(1.57)
Plug-in jack M12 IP67
~52.5 (2.07)
Wire colors for M12 connector: 1 = BN (brown), 2 = WT (white), 3 = BU (blue), 4 = BK (black)
Description
G ¾" ø29 pipe installation
ø50 vessel installation
FDA-listed materials as per 21 CFR Part 175-178
1
G 1" ø53 pipe installation
ø60 vessel installation
A0023557
Description
• elbowed 90°
• 5 m (16 ft) cable PVC (gray)
• Slotted nut Cu Sn/Ni
• Body: PUR (blue)
A0022292
Description
• Self-terminated connection to M12
connector
• Slotted nut Cu Sn/Ni
• Body: PBT
A0022293
Order number
52010285
Order number
52006263
27