Certificates And Approvals; Ce Mark; C-Tick Symbol; Approval - Endress+Hauser Liquiphant FTL31 Manual

Liquiphant FTL31

CE mark

C-Tick symbol

Approval

Overfill prevention

Marine approvals

CRN approval

Inspection certificates

Manufacturer declarations

Pressure Equipment
Directive
Other standards and
guidelines
Endress+Hauser

Certificates and approvals

The following documents are also available in the Download Area of the Endress+Hauser
website: www.endress.com → Download
The measuring system is in conformity with the statutory requirements of the applicable EC
Directives. These are listed in the corresponding EC Declaration of Conformity along with the
standards applied. Endress+Hauser confirms successful testing of the device by affixing to it the CE
mark.
The measuring system complies with EMC requirements of the "Australian Communications and
Media Authority (ACMA)".
CSA C/US General Purpose
Prior to mounting the device, pay attention to the WHG approval documents. The documents
can be found in the Download Area of the Endress+Hauser website.
WHG
• Overfill detection system: Z-65.11-531
• Leak detection system: Z-65.40-532
• GL (German Lloyd)
• ABS (American Bureau of Shipping)
• LR (Lloyds Register)
• BV (Bureau Veritas)
• DNV (Det Norske Veritas)
Versions with a CRN approval (Canadian Registration Number) are listed in the corresponding
registration documents. CRN-approved devices are labeled with registration number 0F16950.5.
The following documents can be ordered with the device (optional):
• Acceptance test certificate as per EN 10204-3.1
• Final inspection report
The following documents can be ordered with the device (optional):
• FDA conformity
• TSE-free, materials free from animal origin
• ROHS-compliant in accordance with Endress+Hauser regulation
The Liquiphant FTL31 does not fall within the scope of Pressure Equipment Directive 97/23/EC as it
does not have a pressurized housing as defined in Article 1, Section 2.1.4 of the directive.
The applicable European guidelines and standards can be found in the relevant EU Declarations of
Conformity.
25