Maintenance; Accessories; Adapter Concept For Dtt35 - Endress+Hauser Flowphant T DTT31 Operating Instructions Manual

Maintenance

5.2.2 Operating Instructions for ReadWin
Comprehensive information on the ReadWin
the related Operating Instructions BA137R/09/en.
6 Maintenance
Any buildup on the sensor can have a negative effect on the accuracy. For this reason, check the
sensor for buildup at regular intervals.
"
Caution!
Make sure the process is unpressurized before you remove the device! Do not twist the device
out of the process connection thread at the housing. Always use a suitable open-ended wrench
for disassembly work (see also → Fig. 4) (→ Chap. 3. 3).
7

Accessories

All dimensions in the drawings are given in mm (inch).

7. 1 Adapter concept for DTT35

The process connection is an adapter and the sensor module has an adapter thread
(→ Chap. 3. 3, process connection). As a result, the process connection can easily be changed
at a later stage.
7.1.1 Adapter change
The adapter can be changed on DTT35.
Fig. 16: Changing the adapter
m Sensor module with adapter thread
n Standard O-ring
o Adapter
22
®
2000
®
2000 configuration software may be found in
DTT31, DTT35
T09-TTR31xxx-17-xx-xx-xx-000
Endress+Hauser