ControlMaster CM30 and CM50
Universal process controllers,
...Functions
Real Time Alarms
Real Time Alarm 1
(2)
Monday (to Sunday)
Month enable
Every hour
On hour
On minute
Duration
Display enable
Tag
7.8 Communication
Menu
Communication
Exit
Select
58
1
1
/
and
/
DIN
4
2
2 Independent real-time alarms can be configured to be activated on particular days and
times for a set duration.
Sets the days the alarm is activated, the alarm duration, alarm display enable in the
diagnostics window and enables a (status bar) tag to be created for the alarm.
When enabled (On), activates the alarm on the 1
When enabled (On), activates the alarm every hour.
Sets the hour the alarm is activated – not applicable if Every Hour is set to On.
Set the minutes past the hour the alarm is activated.
Set the duration the alarm is active.
If disabled (Off), the alarm state does not appear in the operator level diagnostics window or
the alarm log.
A 16-character alphanumeric tag displayed as a diagnostic message that appears in the
Diagnostic Status Bar and in the Operator Level, Diagnostic View – see page 16.
Used to setup communications parameters for the (optional) MODBUS /
Ethernet communication protocols – see separate User Guide (IM/CM/C-EN).
Note. Only one communications option can be fitted per controller.
7 Advanced Level
st
day of each month.
IM/CM/ED–EN Rev. B