ABB CM30 User Manual page 31

ControlMaster CM30 and CM50
Universal process controllers,
...Display
Date & Time
Date Format
Time & Date
Daylight Saving
DS Region
Off
Europe
USA
Custom
DS Start Time
DS Start Occur
DS End Occur
DS Start Day
DS End Day
DS Start Month
DS End Month
IM/CM/ED–EN Rev. B
1 1
/ and / DIN
4 2
Sets the date format, local time / date and daylight saving start / end times.
Selected from: DD–MM–YYYY, MM–DD–YYYY, YYYY–MM–DD.
Sets the controller's time and date.
Sets daylight saving parameters.
Daylight saving is disabled.
Standard daylight saving start and end times are selected for Europe automatically.
Standard daylight saving start and end times are selected for USA automatically.
Used to create custom daylight saving start and end times manually for regions other
than Europe or USA.
Note. Enables Daylight Start Time and Daylight End Time parameters.
The start time selected from 1-hour increments.
Note. Displayed only when the DS Region sub-parameter is Custom.
The day within the month that daylight starts / ends – for example, to set daylight
saving to start (or end) on the second Monday of the selected month, select Second.
The day of the month daylight saving starts / ends.
Note. The Daylight Start / End Occur parameters must be valid within the month for
the selected day.
The month daylight saving starts / ends.
7 Advanced Level
29