ABB CM30 User Manual page 32

ControlMaster CM30 and CM50
Universal process controllers,
...Display
Customise Pages
Page Number
Template Type
Titlebar Tag
Parameters
Parameter Number
Type
Source
Color
30
1 1
/ and / DIN
4 2
The contents and appearance of each Operator Page (see page 16) can be
customized to meet particular user requirements.
Selects the Operator Page (1 to 4) to be customized.
Selects one of the standard operator page templates.
Template codes:
A = Analog value, T = Totalizer value, S = State value (see Parameters / Type below).
A (Style 1) A,A (Style 1)
A (Style 2) A,A (Style 2)
A,A (Style 3)
A,A (Style 4)
A,T (Style 1)
A user-programmable, 16-character alphanumeric tag.
1 to 4 (depending on the Template Type selected).
Enables some parameter types to be modified to enable more flexibility in the available
display formats:

Parameters set as Totalizer value by the Template Type can be changed to
analog or state parameters.

Parameters set as State value by the Template Type can be changed to an
analog parameter.
Selects the signal to be displayed.
Selects the color to be used to display this parameter.
Color codes:
Black Red
Blue Magenta
Dark Cyan Dark Magenta
Dark Blue Dark Red
Theme RGB* Theme RYG**
*For use with State parameter types:

State 0 tag is shown in red.

State 1 tag is shown in green.

State 2 tag is shown in blue.
Applicable only if Template Type = State.
**For use with State parameter types:

State 0 tag is shown in red.

State 1 tag is shown in yellow.

State 2 tag is shown in green.
Applicable only if Template Type = State.
A,A,A (Style 1) A,A,A,A (Style 1)
A,A,A (Style 2) A,A,A,A (Style 2)
A,A,A (Style 3)* A,A,A,A (Style 3)
A,A,A (Style 4) A,A,A,T**
A,A,S (Style 1) A,A,T,T
A,A,S (Style 2)
A,A,T
A,T,T
*CM50 only **CM30 only
Yellow
White
Dark Grey
7 Advanced Level
A,A,A,A,A A,A,A,A,A,A
A,A,A,A,S A,A,A,A,A,S
A,A,S,A,A,A
A,A,S,A,A,S
Chart
Green Cyan
Grey
Dark Yellow Dark Green
IM/CM/ED–EN Rev. B