Fluke 113 Instruction Sheet page 2

•
Do not use the Meter around explosive gas, vapor or in
damp or wet environments.
•
When using test leads or probes, keep your fingers
behind the finger guards.
•
Only use test leads that have the same voltage,
category, and amperage ratings as the meter and that
have been approved by a safety agency.
•
Remove test leads from Meter before opening the
battery door or Meter case.
•
Comply with local and national safety requirements
when working in hazardous locations.
•
Use proper protective equipment, as required by local or
national authorities when working in hazardous areas.
•
Avoid working alone.
•
Check the test leads for continuity before use. Do
not use if the readings are high or noisy.