Fine Adjustment Of Temperature; Electronic Control Of Freezer And Fridge Temperature; To Program This Function - Electrolux DF80 Instruction Manual

Electronic Control of Freezer (DF80/
DF80X/DFI80/DI80X) and Fridge
(DFI80/DI80X) Temperature
By pressing it successively,
the freezer temperature
will be selected as shown
below:
Electronic Control of Freezer and
Fridge Temperature
(Default Temperatures)
Freezer
Adjust
Temperature
Maximum -24ºC (cold max)
---
Medium -20ºC (cold med)
---
Minimum -16ºC (cold min)
The adjustment positions for freezer and fridge
temperature are pre-established at the manufac-
turer plant.
However, the temperature shall depend on the
conditions of the room temperature, foodstuff and
the rate at which the door is opened.
Therefore, be careful not to place foodstuff in such
manner that it blocks the air outlets and avoid
opening the door unnecessarily.
The fridge compartment of models DF80/DF80X
has independent temperature control located
inside and on top of the fridge. For adjustments,
refer to section "Manual Temperature Control of
the Fridge".

Fine Adjustment of Temperature

Your fridge has been manufactured within in-
ternational Standards and has three levels of
temperature with pre-established values at the
manufacturer plant for models DF80/DF80X and
five levels for models DFI80/DI80X, being able to
be adjustable (increase or decrease) according
to your need.
Should you wish to change them, you have the
Temperature Fine-Tuning option for the three/five
levels as explained next.
14
Fridge
Temperature
(DFI80/DI80X)
-1ºC (cold max)
1ºC
3ºC (cold med)
5ºC
8ºC (cold min)
1. To program this function (DF80/DF80X)
1.1. Press the button "AUTO CONTROL" and
select function VACATION and then, press
5 times the button "TEMP. FREEZER". The
function indicator will turn on showing the latest
adjustment made. Temperature fine adjustment
set is valid for the 3 temperature levels of the
freezer compartment.
1.2. Setting Options:
To increase 0.5 ºC to the pre-established tem-
perature, press the button TEMP. FREEZER
until the function indicator shows 05.
To increase 1 ºC to the pre-established tempe-
rature, press the button TEMP. FREEZER until
the function indicator shows 10.
To decrease 0.5 ºC to the pre-established tem-
perature, press the button TEMP. FREEZER
until the function indicator shows 05 with a
dash on its left side.
To decrease 1 ºC to the pre-established tempe-
rature, press the button TEMP. FREEZER until
the function indicator shows 10 with a dash on
its left side.
To decrease 2.0 ºC to the pre-established tem-
perature, press the button TEMP. FREEZER
until the function indicator shows 20 with a
dash on its left side.
After three seconds without pressing any buttons,
the fine adjustment is finished.