“Flex Box” Shelves; Water Container; How To Use The Water Container - Electrolux DF80 Instruction Manual

Frost free
Table of Contents

Advertisement

Available languages

Available languages

"Flex Box" Shelves
These two shelves are used to
store several types of food units
or small packages. To make the
access easy, they are remo-
vable. To facilitate the Access
use them in position 2 and after
using return them to position 1.
Water Container (only for models, DFI80
e DI80X)
Developed to provide pure and healthy water,
given its exclusive filtering system.
Pure Filter
Fill it with potable water only
and wait the filtering to start.
Important: In the first refill use
(filter element) the water can
present a ark aspect, due to the
activated coal black. It is requi-
red to conduct this first filtering
with the container outside the
fridge, preferably in the sink, so the water with
dark aspect is disposed. Repeat this procedure
for 3 times (approximately 9 liters of water). This
procedure must be repeated at every refill
replacement (filter element). recommended to
replace the refill every 6 months or 500 liters. The
indicator of filter replacement will turn on after the
consumption of 500l of water.
How to Use the Water Container (only for
models, DFI80 and DI80X)
1. Detach the water tube of the container.
2. Remove the reservoir from the refrigerator's
door, lifting and pulling it as
shown on the side drawing.
3. Fill the water container and
wait the filtration.
It is required the first filtering
is made in a place the filtered
water can be described (for
instance, in the sink).
Repeat this procedure for 3
times (approximately 9 liters
of water).
This procedure must be repeated at every refill
replacement (filter element).
4. Place the water container in the position and
attach the water tube, pressing firmly down.
5. Open the cover of the superior area of the water
container, fill it up and wait the potable water
filtering process.
12
6. After this procedure, the filtering system can be
used normally.
7. To serve, open the dispenser rotating it, place a
glass in the water outlet located in the external
door of the fridge and activate the button (A)
located right above.
8. In order to avoid undesirable activations, turn
the dispenser and keep it closed (position 1).
WARNING
- Before using it for the first time, wash the
reservoir with water and neutral soap to eli-
minate any residues. Refer to section "Water
Container Cleaning", on page 16.
Use drinking water only. The use of any other
beverage can leave residues, taste or odor
in the container.
- The potable water reservoir should only be
filled when placed into its position on the
door. Water supply temperature shall not be
higher than 43ºC.
- Let the water cool for about 12 hours.
- It is possible to hear some noise from the
air entry when the water leaves the reservoir.
- For models DFI80 and DI80X it is possible
also to hear some noises made by the water
supply automatic system in the ice maker
and water dispenser.
- In case the water is not flowing, press once
again the activating button. Keep the glass
under the water outflow for a few moments
to ensure the water is completely collected
by the glass.
- Do not use gasified beverage such as soft
drinks. The drink may leak due to the gas
pressure.
A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Df80xDfi80Di80x

Table of Contents