Manual Adjustment; Electronic Adjustment - Electrolux ESI 45010 User Manual

www.electrolux.com
8
German
degrees
(°dH)
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the pro-
gramme indicators above function
buttons (A), (B) and (C) start to flash.
3. Press function button (A).
• The programme indicators above
function buttons (B) and (C) go off.
• The programme indicator above
function button (A) continues to
flash.
Downloaded from DishWasher-Manual.com Manuals
Water hardness
French mmol/l
degrees
(°fH)
< 7 < 0.7
Clarke
degrees
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The end indicator starts to flash.
The number of flashes shows the
current level of the water softener:
– E.g. 5 flashes + pause + 5 flashes
= level 5.
4. Press function button (A) again and
again to change the setting. Each time
you press function button (A) you go
to the next level.
5. Deactivate the appliance to confirm
the setting.
Water softener
adjustment
Manual Elec-
tronic
2) 2)
1 1