Manual Adjustment; Electronic Adjustment - Electrolux ESF 6550ROW User Manual

10 www.electrolux.com
German
degrees
(°dH)
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to "Set-
ting and starting a programme".
2. Press and hold, at the same time, De-
lay and Start until the programme in-
dicators
start to flash.
3. Press Program.
• The programme indicators
Water hardness
French
degrees
(°fH)
< 7
, and
and go off.
mmol/l Clarke
degrees
< 0.7 < 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The programme indicator
continues to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4. Press Program again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
Water softener
adjustment
Manual Elec-
tronic
2) 2)
1 1