Advertisement

Quick Links

ESI5559LOX
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux ESI5559LOX

  • Page 1 ESI5559LOX Dishwasher User Manual...
  • Page 2: Table Of Contents

    14. SAUDI ARABIA - CUSTOMER SERVICE ............. 23 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH 2.4 Use cable. Should the mains cable need to be replaced, this must be carried out • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.
  • Page 6: Product Description

    2.7 Disposal • Cut off the mains cable and discard it. • Remove the door catch to prevent WARNING! children and pets to get closed in the Risk of injury or suffocation. appliance. • Disconnect the appliance from the mains supply.
  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button Start button Program button Indicators Programme indicators Option button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. TimeManager indicator.
  • Page 8 Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • TimeManager • Crockery and • Wash 50 °C • XtraDry cutlery • Rinses • Dry • All • Prewash • XtraDry • Crockery, cut‐...
  • Page 9: Settings

    ENGLISH Water Energy Duration 1) 2) Programme (kWh) (min) 13 - 14 0.9 - 1.1 70 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. 2) The values for programmes other than ECO are indicative only.
  • Page 10 Softening hard water good washing results. increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration.
  • Page 11: Options

    ENGLISH If standard detergent or multi-tablets CAUTION! without rinse aid are used, activate the Do not try to close the notification to keep the rinse aid refill appliance door within 2 indicator active. minutes after automatic opening. This can cause How to deactivate the rinse aid damage to the appliance.
  • Page 12: Before First Use

    7.2 TimeManager Not all options are compatible with each other. This option increases the pressure and If you select non compatible the temperature of the water. The options, the appliance washing and the drying phases are automatically deactivates shorter.
  • Page 13 ENGLISH hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start a programme to remove any processing residuals that can still be inside the appliance.
  • Page 14: Daily Use

    You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity). 9. DAILY USE 1. Open the water tap. For information about the 2. Press the on/off button to activate the detergent dosage, refer to appliance.
  • Page 15 ENGLISH The display shows the programme Cancelling the delay start while duration. the countdown operates 4. Set the applicable options. 5. Press Start to start the programme. When you cancel the delay start you • The washing phase indicator have to set the programme and options comes on .
  • Page 16: Hints And Tips

    10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment.
  • Page 17: Care And Cleaning

    ENGLISH 3. Start the shortest programme with a • Make sure that the spray arms can rinsing phase. Do not add detergent move freely before you start a and do not put dishes in the baskets. programme. 4. When the programme is completed, 10.5 Before starting a adjust the water softener according to the water hardness in your area.
  • Page 18 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).
  • Page 19: Troubleshooting

    ENGLISH • If you regularly use short duration • To maintain the performance of your programmes, these can leave appliance at its best, we recommend deposits of grease and limescale to use monthly a specific cleaning inside the appliance. To prevent this, product for dishwashers.
  • Page 20 Problem and alarm code Possible cause and solution The appliance stops and • It is normal. It provides optimal cleaning results and starts more times during energy savings. operation. The programme lasts too • Select the TimeManager option to shorten the pro‐...
  • Page 21 ENGLISH WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. 12.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results.
  • Page 22: Technical Information

    Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". • Silver and stainless steel cutlery were placed to‐ gether. Do not place silver and stainless steel items close together.
  • Page 23: Saudi Arabia - Customer Service

    ENGLISH Capacity Place settings 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 14. SAUDI ARABIA - CUSTOMER SERVICE Further after-sales service agencies AL Dammam, Kingdom of Saudi Arabia.
  • Page 24 www.electrolux.com/shop...

Table of Contents