10 www.electrolux.com
German
degrees
(°dH)
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. Make sure that the display shows the
programme P1. If the display shows a
different programme, press and hold
buttons (4) and (5) until P1 shows in
the display.
3. Press and hold buttons (4) and (5) at
the same time until the indicators of
buttons (3), (4) and (5) start to flash.
4. Press button (3).
• The indicators of buttons (4) and (5)
go off.
Water hardness
French
mmol/l
degrees
(°fH)
26 - 32
2.6 - 3.2
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
< 7
< 0.7
Clarke
degrees
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicator of button (3) continues
to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the setting of the
water softener, e.g.
5. Press button (3) again and again to
change the setting.
6. Deactivate the appliance to confirm
the setting.
Water softener
adjustment
Manual
Elec-
tronic
1
4
1
3
1
2
2)
2)
1
1
= level 5.