Technical Information - Electrolux ESI 45010 User Manual

Stains and dry water drops on
glasses and dishes
• The released quantity of rinse aid is not
sufficient. Adjust the rinse aid selector
to a higher position.
• The quality of the detergent can be the
cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature drying
phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
• The quality of the combi detergent tab-
lets can be the cause. Try a different
brand or activate the rinse aid dispens-
er and use rinse aid together with the
combi detergent tablets.
Refer to 'HINTS AND TIPS' for
other possible causes.
10.2 Activating the rinse aid
dispenser with the multitab
option activated
1. Press the on/off button to activate the
appliance. Make sure that the appli-

11. TECHNICAL INFORMATION

Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
Downloaded from DishWasher-Manual.com Manuals
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
1)
Cold water or hot water
Place settings
Left-on mode
Off-mode
ance is in setting mode, refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the pro-
gramme indicators above function
buttons (A), (B) and (C) start to flash.
3. Press function button (B).
• The programme indicators above
function buttons (A) and (C) go off.
• The programme indicator above
function button (B) continues to
flash.
• The end indicator is off.
4. Press function button (B) to change
the setting.
• The end indicator comes on. The
rinse aid dispenser is active.
5. Deactivate the appliance to confirm
the setting.
6. Adjust the released quantity of rinse
aid.
7. Fill the rinse aid dispenser.
446 / 818 - 898 / 575
(0.5 / 0.05 ) / (8 / 0.8 )
2)
ENGLISH 15
220-240 V
50 Hz
max. 60 °C
9
0.99 W
0.10 W